Tell us about yourself!
wunderground doesnt provide free API anymore. Any other solution?
Internet Smart Plugconnecting to Daniel_NET......wifi connectedIP address: 10.1.1.104Error :( . Server is offline.Turning Server offTurning Server on> www.google.com:443/< HTTP/1.1 302 Found> www.google.com:443/< HTTP/1.1 302 Foundstatus: OKRouter is connected to Internet, nothing to dodisabling WIFI then wait: 10000 miliseconds.restarting ets Jan 8 2013,rst cause:2, boot mode:(1,6) ets Jan 8 2013,rst cause:4, boot mode:(1,6)wdt resetAfter this part, the program stops permanently, this is the problem... Whats is wdt reset?? it isnt in the code... something is wrong
Many thanks for your response, it really worked for that part!But now I have another problem, the text "turning off server" and "turning off router" appear on the serial monitor, but on the board, ports D1 and D2 are always high. No change of state from HIGH to LOW occurs. Any idea what that might be? I tried to manually change the initial state of the ports, for testing, starting at LOW on the pinmode, even though they always start HIGH and do not change ...
Hi friend, Im using your code and I need help.After disable wifi its is restarting, i dont know why!Internet Smart Plugconnecting to Net-Virtua-Daniel.....................wifi connectedIP address: 192.168.0.20Server is online, nothing to do!!> www.forthnet.gr:443/< HTTP/1.1 301 Moved Permanently> www.google.com:443/< HTTP/1.1 302 Foundstatus: OKRouter is connected to Internet, nothing to dodisabling WIFI then wait: 30000 miliseconds.restarting <----(What???) ets Jan 8 2013,rst cause:2, boot mode:(1,6) ets Jan 8 2013,rst cause:4, boot mode:(1,6)wdt reset <----- (stops the program permanently)Can you help me???
Hi, Im using your code, all works good but when I try simulate a internet fail (removing cable of modem), I recive this message below, and relay dont change state.I can not reset the relay, I dont know why (I tested the relay in other arduino, and its works fine).PS: I change local onValue = 1 or local onValue = 0, and in both situation allways the green led is HIGH on the rellay (I think it should be changed the start mode relay)PS2: Sorry my englishSending request to www.google.comDNS retry 1!No callback ack on loop 5 of 6Sending request to www.google.comDNS retry 1!DNS retry 2!No callback ack on loop 6 of 6Resetting Access PointSending request to www.google.comDNS retry 1!DNS retry 2!DNS retry 3!DNS retry 4!DNS Fail!DNS Fail!DNS Fail!