DanishMalhotra

HI! I added the project files in the blog itself. You can download from there. 60E is the value of ferrite bead. I used ferrite bead for spike filteration. It's 60 ohms ferrite bead

Added the files in the blog. You can download

Added the files in the blog. You can download from there. Thanks

Hi,Add these lines in the current code after for loop.for (x,y,w,h) in faces:x = x + 10 # increasing the x coordinate of detected face to reduce size of bounding box y = y + 10 # increasing the y coordinate of detected face to reduce size of bounding box w = w - 10 # reducing the w coordinate of detected face to reduce size of bounding box h = h - 10 # reducing the h coordinate of detected face to reduce size of bounding boxcv2.rectangle(img,(x,y),(x+w,y+h),(255,0,0),2) I have reduced the boundary box size. I didn't run it on raspberry pi zero. Just check if it works for you. Let me know how it goes

Hi,I'm using picamera

Hi,Plz check the haarcascade file is there in the location mentioned in code. Error is because of that file location not found. Other thing u can do is just copy the face and eye haarcascade file to that location

Hi!Go through this datasheet of the IChttp://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=PCM2912A&fileType=pdfU will get all the information thereThanks

Thanks!! It's attached in the step 6 USB_SOUND_CARD.pdf download this

In Arduino which board u selected node mcu or esp8266?. In your error it looks like u selected esp baord. and also plz confirm u followed the point 9 of step 3

change the user interface.h file. follow point 9 of step 3

share all the files with me. I'll try that code on my arduino id and will try to fix the erros. Here is my email id: danish.malhotra@live.com

Did u edited user_interface.h file? Share ur full code i'll check

Hi,Please email me danish.malhotra@live.com

Send me ur email