Tell us about yourself!
Thanks for your assistance on this build. Went through everything today and changed the wiring per your suggestion and it works perfectly.
Ah ha, will do.Thanks
I’ll post pictures.
I built the battery version. 3 batteries, Tattu,1300mAh, 4 cells, 14.8 v, 19.2 Wh. I separated a coil that appeared to be touching an adjacent one. Still does not get hot enough to use on a seized bolt.
Here are pictures of what I built. I’m not sure you’ll be able to make much of these.
I built the unit using the exact parts list in your posting. I only checked the battery voltage before trying it. They were fully charged. Its was a 3/8 bolt.I did not check the current draw. I did start the device with the bolt already in the coil.