JustinB37

I mentioned in the Instructable that I just used the code from this project:https://learn.adafruit.com/florabrella/codeUnless that is not what you are asking?

Hey, they are very alike. Both are sewable micro-controllers, but Flora can just handle more lights, more sensors, and memory for bigger projects. Flora isn't needed for a simple project like this, but could be beneficial if you want to repurpose it down the line.This short video breaks it down:https://www.youtube.com/watch?v=bGVBR4BwIPs

Sounds good!The lithium ion battery can be charged with a simple usb dongle.Battery: https://www.adafruit.com/product/2011Dongle: https://www.adafruit.com/product/1304

How long do you think the vegetable glycerin will last?

Wow, I came here to share that exact study :)Definitely wouldn't be trying to burst any bubbles either and don't think you are.This may help reduce the smell, but harmful particles are still going to get out unfortunately.Might help to rename the title of this and put the disclaimer at the top?Keep being addicted to this awesome hobby! I know I am :P

Haha, exactly! We care about your life!But unfortunately HEPA filters will be inefficient as well. While studies show that HEPA filters can capture at less than 0.3 microns that is all they are rated for. And as Kyle mentioned and is written about in the study, ABS can go as low as 0.02 microns. I don't know of any filter that will work currently (But willing to learn about one if I'm wrong) - Basically you still need a properly sealed chamber for your printer and sealed ventilation out of the room.

I don't have an exact figure - I'll try to do the math later tonight.But in the real world scenario, it lasted the whole time I was in the park! I turned it off a few times, like on rides and during shows. And then I simply charged the battery overnight to be ready to go again in the morning!

Thanks! I appreciate it :)