Tell us about yourself!

Complete Your Profile
  • The More Powerful Arduino-UNO,Massduino-UNO

    #include <pwmFuncs.h>uint16_t dutyMax = 0xff;void setup() { // put your setup code here, to run once: // usage: pwmMode(pin, pwm_mode, freq_mode) // Note: PWM of D3/D11 is controlled by timer2, which is used for system tick (delay) // - so it's not allowed to change its frequency, we can only get its default settings. // - pwmMode() settings will do nothing for D3/D11's frequency, // - the more, timer2 do not support complementary mode, so only PWM_MODE_SOLO is supported. // PWM_MODE_SOLO: d3/d11 working in independed mode // In one word: // pwm of D3/D11 frequency is fixed to 970KHz (as stardard arduino) // only duty ratio can be modified, between 0 ~ 255 pwmMode(D3, PWM_MODE_DUO1, PWM_FREQ_FAST, 0); // usage: pwmWrite(pin, duty) pwmWrite...

    see more »

    #include <pwmFuncs.h>uint16_t dutyMax = 0xff;void setup() { // put your setup code here, to run once: // usage: pwmMode(pin, pwm_mode, freq_mode) // Note: PWM of D3/D11 is controlled by timer2, which is used for system tick (delay) // - so it's not allowed to change its frequency, we can only get its default settings. // - pwmMode() settings will do nothing for D3/D11's frequency, // - the more, timer2 do not support complementary mode, so only PWM_MODE_SOLO is supported. // PWM_MODE_SOLO: d3/d11 working in independed mode // In one word: // pwm of D3/D11 frequency is fixed to 970KHz (as stardard arduino) // only duty ratio can be modified, between 0 ~ 255 pwmMode(D3, PWM_MODE_DUO1, PWM_FREQ_FAST, 0); // usage: pwmWrite(pin, duty) pwmWrite(D3, dutyMax >> 2); pwmWrite(D11, dutyMax >> 3);}void loop() { // put your main code here, to run repeatedly:}=========================================================The missing arduino-preprocessor patternCompilation error for MD328D-LQFP32.time resolve please

    View Instructable »
  • MariuszW6 commented on Peter Balch's instructable Transistor Curve Tracer4 months ago
    Transistor Curve Tracer

    hello. I am asking you how much it would cost to make plates for the odcoder and tracker transistor 2 pcs including. part of it would be done by a Chinese company for symbolic $ 5. I can not ask questions to the author Peter Bonie I know the email address.

    hello. I am asking you how much it would cost to make plates for the odcoder and tracker transistor 2 pcs including. part of it would be done by a Chinese company for symbolic $ 5. I can not ask questions to the author Peter Bonie I know the email address.https://qetesh.de/?load=ardosc

    View Instructable »
  • MariuszW6 followed Peter Balch4 months ago
      • Signal Generator AD9833
      • Oscilloscope in a Matchbox - Arduino
      • Transistor Curve Tracer