Tell us about yourself!
3D Printer Bed Upgrade/Replacement
Guitar to AV Receiver Interface
Portable Guitar Preamp
DIY Small Bench Power Supply
Thanks for this instructable. I made one small power supply with two channels for my son to use it for his arduino and robotics projects.For the power input I used an old laptop power adapter 19.5V / 4A.
Thanks for this "instructable". I made a small supply with two outputs for my son to use it on his arduino projects.
Small DIY Bench Power Supply
Making a Formboard Dice Tower
Hi Andrei, Thanks for this instructables.Here is my board, I will come back with details when I finish it and test it.
Superb Lab Power Supply
High Performance Adjustable Power Supply (~£50) With Optional Digital Control
A Simple Voltmeter
Hi, in my case I used optiloader as a bootloader and made my chip like Arduino Uno, where A0 is pin 14 (in software ) and actualy hardware pin 23 on the chip ( atmega 328P ).
Hi, I just want to say thanks for this great instructable. I just finished building it. It is working very good.In Arduino code #define IND_2 12 is not in concordance with the schematic diagram. I modified it to #define IND_2 14 and it is working great.Thanks again.
Arduino Inductance/Capacitance/Resistance Meter
Raspberry Pi Alamode CNC Controller