Tell us about yourself!
Those are great! They'd make attractive loudspeaker housings.
I can't think of anything more. You might try an different browser on your desktop or use a friend's machine maybe. Good luck.
Hi. The lick isn't there for "I Made It" if you're using an ad blocker. HTH
Made with clear PVA and a few dabs from a water based highlighter pen.
How to Make Slime Without Borax + Lesson Plan
Build the MS Alice Stereo Microphone
Hi, it's unlikely that the transistor alone has anywhere near enough gain to be clipped at the output by those diodes. Luckily you have most of the parts for the 7 minute fuzz (ask Google).
This is a great project - your code is very elegant. I have it working with a WS2812S strip on 5V. I've tied A6 high as I'll have battery protection in hardware and I couldn't select more than 16 leds otherwise.The BRIGHTNESS allows me to keep the current to a reasonable level for my single 18650 with a mod in the hit_flash for a brighter effect.Again, fine code, great project. Thank you.
Hi - Not Mr Gyver but I've just put exactly those parts on a breadboard with Ground proper used. It doesn't in fact work otherwise. I'm also going to use 5V LEDs at reduced voltage (and current) but found today up to 16 LEDs only with this software.The sounds and responsiveness are impressive though. I'll probably use the Adafruit library rainbow for this as it's for my grandson. The Force is strong with him.
The USB Plugbulb
Tidy! I wondered if you'd come across this AMC7135 LED driver though, it could have saved you some time with your Plugbulb and they're cheap too.https://www.rcscomponents.kiev.ua/datasheets/doc00...Nevertheless, tidy project, thanks.
Connect PS/2 Keyboard to Arduino
Amazing, Cheap & Easy, Cracked Gems & Marbles. for Fantasy & Crafts.
Iridescent Epoxy Beer Tap Handles
Upcycled Glass Lamps With Mason Jar
The NanoStillery™ - Automated Whiskey Distillery
Ink Removal From Soda Cans
You can use a colour changing RGB LED in there. They have a tiny chip inside to change colour automatically and only cost pennies.https://youtu.be/gK6__cX7QgY
Giant 555 Footstool
Jimmy DiResta Collaboration: 26 Geometry, Rulers & Patterns Workshop Tips
Wooden USS Enterprise Model
Electroformed Turquoise Earrings
Easily Pour Paint from Small Cans
Large Funduino (colorduino) 8 * 8 full colour LED display running “plasma”
Ping Pong Ball Full colour Binary Clock
Salvaging parts from burnt out mini-fluorescent lamps
The Fifth Element Stones Pillar Candle Holders
Pocket laser engraver.
Golden (inside out) Geodes
Apple II Watch
Multi-Tool Flip-Top Table
Make a Bridged Stencil From Any Image
The Nerd Watch
Make A Wi-fi Webcam From An Old Android Phone
Hardware Store Steel and Copper Bracelet
How to Drill Straight Holes with a Hand Drill (Using Lego)
Hideaway Drafting Table
Soda Bottle Rocket Launcher
Yet Another DIY Diode Laser Engraver