Tell us about yourself!
BillB250... While I appreciate your attempt to help, I have since done some research and find out that what you suggest is not acceptable. My product was cloudy grey because the particles were too large and too many. .I want a clear liquid of low ppm (10-15) of very small particles. 150 ppm is way too high Diluting is NOT the answer. And an adequate TDS .meter doesn't cost no $100 ! When particles are small enough the resulting liquid will be clear. That can be achieved by controlling the current. I put a potentiometer and a multimeter in series with 3 9v batteries. I can control the current so that it is no greater than 1 milliamp. The result is beautiful!!!