ADC Graph on STM32F769I Disco
Yeah. I will work on those things. Thanks a lot for suggestions.
I'm extremely sorry for the mistake in the circuit diagram. I'll rectify this.
Yeah. That was my old mechanism with gears and all. But you can do that with a microcontroller
Thanks a lot for your response
Yes. U just need to have a SIM card and you can give miss call which won't cost you anything
Oh. I didn't know that.
Thanks a lot.
Oh. That's a good idea for feedback. Thanks a lot sir.
3D Printed Hot Wheels GoPro Car
Hey thanks a lot for your good words.
Connect two LDRs to Arduino microcontroller and read analog voltage of each. Compare both using if condition and then output it accordingly on digital pins.
Pocket E-Waste Microscope
Convert Your Old Phone to a...View Instructable »
Pocket Wire Finder
Convert Old Mat to a Cleani...
Wonderful instructable. Looks cool.
It's opensource computer hardware or I can simply discribe it as microcontroller for everyone.i.e anyone can learn this without any pre requisites. For more information on this please refer www.arduino.cc
Design Sketching Class
Yeah you can use 2 or more sensors. Or if u want you can use a raspberry pi with camera to calculate maximum colour and then that info van be sent to neopixel LED. For PC you can use some vbscript to give colour values over serial port and then using that colour info to neopixel led.
Hey. I'm yet to integrate hue in this. I'll try and I'll let you know my progress. Here's video link :https://youtu.be/-wrkIzEo6Ls
I have mentioned applications in step 5. Please go through it. Something like this.
Electronic ChameleonView Instructable »
How to Repair EarphonesView Instructable »
Yes. Of course, you can use nrf24l01. This uses SPI communication between the microcontroller and the NRF24L01 module. This will help you to increase the range of your plane. There are many libraries like Radiohead library, RF24 library etc. Code part will remain same you can replace the virtual wire library to RF24 library and send the data through the SDO or MOSI pin etc.
Thank you very much.
Hey, thanks for your comment. This is diffraction experiment
Yes. You are right. Fringes are perpendicular to the wire Even I got the same result. In my experiment the wire was at about 40 degree to horizontal so I obtained fringes perpendicular to it.
You can check this video. https://youtu.be/1XdKoZKHj5M
Oh. Thanks a lot. I got it. Thanks again for piece of information.
Laser Microscope & Laser Diffraction
Hi Michal Choma, Thanks for your comments. The bright part of the dotted lines are nothing but fringes of diffraction pattern. You can refer this : http://physicsed.buffalostate.edu/pubs/StudentIndepStudy/EURP09/Young/Young.html
Laser Microscope & Laser Di...View Instructable »
Hey, Woderful project. Can you please send me the main code my email id is email@example.com
Awesome project bro.
Hey, you can check the wireless connectivity between Tx and Rx like this, once you power up both Tx and Rx side , Rx LED of arduino nano turns on or blinks as data it receives data. Check the data pin connections of both RF modules. Pin no 11 in receiver side and 12 in transmitter side.
Thats receiver. Data pin pin of that receiver is connected to arduino nano's pin no 11 as shown in figure. And tge power to receiver unit is provided by ESC's BEC .
@shiblee download arduino 1.0.4 for zip version and run the code there. There's a problem in newer versions of arduino IDE.
Thank you very much @ SaieshC and snagaraj3
Interfacing Brushless DC Motor (BLDC) with Arduino
Mini CNC Plotter
Circuit Board Manufacturing Without a Computer Part 2: the Etching Process
DIY FPV Racing Drone
Intro to Printed Circuit Boards
Thanks @ NapoleonA
Arduplane - Arduino based rc aircraft
I will upload it as soon as possible because first 2-3 flights were crash landing. I have to make a video..:) @ vishnu-a
Thank you seamster for your comment.