Tell us about yourself!
It would work smoother with washers made of plastic [milk jug material or ice cream tub , fast food container ] between the wooden arms to lessen the sticktion.
well done now i can teach my kids morse and they can see their send and not worry about me laughing too much.
You are welcome ! keep up the good work and be safe
Hi, nice one, done this similar idea over the past years . one thing i did was cover the LED light panel with cling film and had it on the cover on the outside of a top cut out slightly smaller than the LED panel. the filter was the hardest thing for me.
Hi, nice job well thought out as for a dust seal I use a stuff called SUGRU a moldable silicon rubber that sets flexibly
Benchtop Micro Milling Machine
Hi, cut the damaged thread off with a hacksaw ?
All these fancy lubes & chemicals , we use a plastercine dam round the bolt head or nut which ever is easier then por coca cola in the dam leave over night (the worsst case we had was over a week end ) as easy as that and no flamables/poisons/ skin irritants to deal with on clean up
Tony as always a great source of ingenuity, thanks
Hi, because lke magnetic poles repel they act as suspension or damper so that the motor is assisted when all the water/clothers are on one side of the rocking motion
Hmm, which came first the 3D printed parts or the 3d Printer ?
Mr_FID, Thank you for the additional info, now to get busy. As to your "addiction" I "suffer" from the same symptoms but with hand tools :-) S & F Geo.
Hi, great little project well presented but a suppliers list for those of us who do not have an extensive "spares" box would be a neat addition.
Nice one:-) A friend used cardboard in layers as Insulant on his "man cave" then painted it having used size to make the surface less porous. Now he can work out there in the coldest of days
valid point but what he did was break the inter-metal corrosion with the heat and made it easier to remove.I did find not replacing the spring washer etc with new ones to be false economy. However the end result made the drill press good to look at and it works.Good instructable for those who are feeling a little timid about stripping old machinery.
trouble with a mobile bench is it moves ! no where do i see any mention of locking the bench so that when using a plane or sanding it does not move.