Tell us about yourself!
Complete Your Profile- amohcen followed Garagem Fab Lab11 months ago
By Garagem Fab Lab
- amohcen followed educ8s, Akin Yildiz, GreatScottLab and GwenaelJ11 months ago
- By educ8s
- By Akin Yildiz
- By GreatScottLab
- By GwenaelJ
- amohcen followed MertArduino2 years ago
- By MertArduino
- amohcen made the instructable IoT: Raspberry Pi Robot with Video Streamer and Pan/Tilt camera remote control over internet2 years ago
- amohcen followed Kurt E. Clothier2 years ago
- By Kurt E. Clothier
- amohcen followed amandaghassaei3 years ago
- amohcen favorited Stewart Platform by thiagohersan3 years ago
- amohcen favorited Your First Robot Volume 2 by zazenergy4 years ago
- amohcen favorited 6WD robot with aluminum chassis by vmmv4 years ago
gpio 18 that you used to control the motor speed as "gpio -g mode 1 pwm" doesn't work with this command "cd /home/pi/PiBits/ServoBlaster/usersudo ./servod --p1pins=11,16cd "I mean that I have to remove this command if I want to chosen between control to speed or control to servos because gpio 18 always gives me 1 that makes the motor always in high speed.I wish if you could help me to solve this problem, please