author

arvi0322

Inbox View Profile
6Comments

Tell us about yourself!

  • arvi0322 commented on pinaki_s91's instructable Morse Code Decoder
    Morse Code Decoder

    Hello,do you know how to make the font on the serial monitor bigger? I want to make it easier to read. thanks.

    View Instructable »
  • arvi0322 commented on pinaki_s91's instructable Morse Code Decoder
    Morse Code Decoder

    Hello,After reading your replies several times, I understood that I should change the wiring to make the LED blink on the breadboard. Now, I made the LED on the Elegoo and the LED on the breadboard blink at the same time as each other.These two are following the "blink each second" code/rule thing that you said, so I was looking at the program to try and delete that. I could not find the code that makes it blink. I think that once I delete the code, the actual code that you put on this site will run and the circuit will be completed. The tactile switch doesn't affect anything when you click it.Is there anything that I can do on the Elegoo, like making the default blinking code inactive? Thanks.

    Hello, I finally got it to work! I watched videos on YouTube and I figured out what I needed to do. Instead of the online sketch, I opened the actual software in files and I opened the "serial monitor" instead of the plain old monitor. Thank you for all of your help! I really appreciate it! 😊 😊

    Hello,in the video below, I changed the wire that goes to the LED to #13 on the elegoo. Then, I pressed the tactile switch and the orange light on the elegoo blinked, which is what I think you mean...also, the LED on the breadboard itself still didn't work. Thank you for your help!

    Hello,Below I have uploaded a few photos of the circuit. I first copied and pasted the code, not knowing that you could download the whole program. Earlier this morning I downloaded the code, so it should be working now. I also rebuilt the circuit and it looks identical to the diagrams and pictures. Still, the tactile switch on the breadboard doesn't turn on the light (LED). We thought te switch itself was faulty, so we tried to replace it, yet it still didn't work. Hopefully, with photos, you can identify the problem better. Thank you!

    View Instructable »