Tell us about yourself!
I caution builders to make sure your old webcam works with your OS first. I have an old webcam (Logitech V-UM14) that won't work beyond Windows 7. I hate to have someone build this only find out there aren't any drivers for it. Other than that I think your instructable is pretty concise... I built one somewhat like this for a USB Microscope, but I used a wood frame.
Revolting Edible Fruit Scabs for Halloween
He wrote it WON'T work with inkjet printer. He used a LASER printer.
Photo Transfer to Soda Can
An Accurate Drafting Compass From Office Supplies
Most all power supplies I've seen had a label on the side announcing the wire values and amps.
You can daisy-chain them together but you may overheat the wire if you draw too many amps total. Better safe than sorry and run just one to each ground... or better yet two if you have enough wires. I've seen some people run as many as the can to each post, including the 3V, 5V and 12V lines.
What does charging circuit do?. Is it protection for smartphone? Could you just solder LEDs directly to USB cable?
I picked up a free PwerWhells off craigslist. It didn't run even after charging. Turns out the wire to the "gass" pedal wasn't connected. A quick solder and it ran fine.
On the printer box it would be funny if the red switch pusher looked like a finger... fun for kids (or scary).
Quick... contact toy maker with this idea!
How to Scan Objects Into 3D Models W/ Camera for Free
Free TV! the Makings of a Frankenstein Antenna
You should use compounds specifically sold for sandblasting. Beach sand could cause silicosis (caused by inhalation of silica dust).
How to Measure Current and Why Should You Do It?
Another source for the lens is an old cd/dvd rom drive. Those lenses pop off easily.
Without a touchscreen how did you install the weather software and configure the tablet?On a side note, I hope no one realizes you have a camera hidden behind that mirror :)
Pretty cool build. I have a question though... forgive my ignorance. Doesn't a helicopter communication board have just two motor attachments? If so how did you connect four motors to it?
I'm always using cardboard boxes for my projects. My neighbor gave me a bunch of cell phone boxes that I turned inside out and used for parts holders.
I'm always using cardboard boxes for my projects. My neibor gave me a bunch of cell phone boxes that I turned inside out and used for parts holders.
I'm always using cardboard boxes for my projects. My neighbor gave me a bunch of cell phone boxes that I turned inside out and used for parts holders.I imaging just seeing those ice cream cone photos get your pulse up just a bit though.
I'm always using cardboard boxes for my projects. My neighbor gave me a bunch of cell phone boxes that I turned inside out and used for parts holders.I imagine just seeing those ice cream cone photos get your pulse up just a bit though.
Very nice tutorial.I just want to add this website which help calculate resister value:https://www.superbrightleds.com/led-info/
Turn our wii remote upsidedown?
Just follow the wires from your ON/OFF to the board, that's where you'll short them. Or just cut the wires and splice them together.
It looks cool. I thought it was a tablet at first. I think air filled rubber tires would make it a lot quieter, adding to the illusion it was floating.
I agree, it's just a conglutination of what he did, not how it's to be done.
I the USA we call them "wall outlets.".. or just "outlet".
???I walked into the kitchen turned on the faucet filled for a second and it worked. I then added some more and it worked. Once more I added water and it worked... there's a lot of leeway in the amount of water (or pop) that you can add.
When I had a pair of headphone where the cable kinked, I dipped it in hot water util it relaxed.