Tell us about yourself!
By carefully adjusting cut speed, air pressure, power sittings, etc. u can often eliminate any dross.
What You'll Need & Learn
Raspberry Pi Class
Tools and Materials for 3D Scanning
Advanced 3D Printing Class
3D Scanning Class
How to Sharpen Used and Dull Drill Bits (By Hand!!)
Tools + Materials
Fusion 360 Orientation
A thought on cutting the rims apart. I use a lazy Susan for the wheel and a simple brace to hold the plasma torch steady. Minimal or zero grinding needed to weld back together
Well said farna.I grew up near a rental yard. I remember as a youth (looking time ago) walking into the shop and the owner had cut the ways on a lathe to accommodate the cutting apart and welding some rims for some really wide tires on a jeep. This was way before such things were available to buy. The results and safety are always dependent on the Craftsman doing the making.
Iron Man! How I Made My Own Metallic Piece
Large Motors Class
Table Saw Class
Copper based metals anneal by quenching, unlike iron based that harden when quenched.
3D Printing Class