djsnowman06's instructables
Tell us about yourself!
Complete Your Profile- djsnowman06 followed NurdRage16 days ago
By NurdRage
- djsnowman06 commented on FrancoMolina's instructable DrumCube, an Arduino Robot Drummer21 days ago
- djsnowman06 favorited Geodesic Cedar Greenhouse by gentleworks21 days ago
- djsnowman06 commented on Mr innovative's instructable How to Make LDR Darkness Sensor Circuit Simple DIY21 days agoView Instructable »
The circuit as drawn is a darkness sensor. Swap the position of the 50kohm resistor and LDR and it should light the led when it detects light.
- djsnowman06 completed the lessons Understanding 3D Scanning and Tools and Materials for 3D Scanning in the class 3D Scanning Class2 years ago
- djsnowman06 enrolled in 3D Scanning Class2 years ago
- djsnowman06's instructable Master-Slave Current Sensor's weekly stats: 2 years ago
- 209 views13 favorites1 comments
- djsnowman06 commented on Rainh2o's instructable Converting a Generator to Run on Propane2 years agoView Instructable »
It certainly can. The only problem is fuel availibility. It is tough to source. That being said you are probably thinking of making hydrogen from water, an inefficient proposal.Electrolysis of water its more like a battery than a source. It is a great way to store energy, but only if you can find an efficient method of converting it back to water.If you had other ideas, i apologize, please share! If im correct, start looking at fuel cells.
- djsnowman06 posted an instructable Master-Slave Current Sensor2 years ago
- djsnowman06's instructable Two Relay DC Motor Control (Simple H-bridge)'s weekly stats: 2 years ago
- 211 views17 favorites1 comments
- djsnowman06 favorited Cheap Sensors: RPR220 by sdfgeoff2 years ago
- djsnowman06 followed GreatScottLab2 years ago
- By GreatScottLab
- djsnowman06 commented on randofo's instructable How to make an H-bridge2 years agoView Instructable »
Here i just mad an instructable about it https://www.instructables.com/id/Two-Relay-DC-Motor-Control-Simple-H-bridge/
- djsnowman06 posted an instructable Two Relay DC Motor Control (Simple H-bridge)2 years ago
- djsnowman06 commented on randofo's instructable How to make an H-bridge2 years agoView Instructable »
Why dont you just use 2 spdt relays. Connect each lead of the motor to the common pin. Connect the 2 nc pins to ground, and connect the 2 no pins to Vcc. That way you just energize one for clockwise and the other for counter-clockwise. Benifits are it's simpler, uses less parts and is impossible to short circuit.
- djsnowman06 completed the lessons Tools and Materials for Arduino and Welcome to Arduino in the class Arduino Class2 years ago
- djsnowman06 enrolled in Arduino Class2 years ago
- djsnowman06 commented on pilx's instructable Floating Dock with Barrels (UPDATED)3 years agoView Instructable »
Just over 500 lbs. Provided this is fully submerged...
Does it still show up 45 mins late and drunk? Need that for authenticity... Great project man. Now I wanna hear it play "Holy Wars... The Punishment Due"