Tell us about yourself!
Have you ever poured soap over it on a windy day? Wow, the bubbles it would make! :-)I have to see if I can make one with a handle....
Good idea about the sleeved boxes, I'm going to try that. One question - instead of support blocks, could you drill holes at the desired heights and then insert a bolt to keep the table at the desired height? This would remove the need to have different support blocks for different heights and just use the same bolt at whatever height had been drilled.
Acoustic Radar Display
I just bought these two $70: https://www.amazon.com/gp/product/B015EPNFOS/ref=o...$45: https://www.amazon.com/gp/product/B074MZLHZ5/ref=o...Of these, the 'Power TRC' is much more stable than the ICStation.However, I still plan on making this just to see if I can add more magnets / Height, be able to ramp up the power to lift up from ground level (would be awesome for a Halloween trick) and just because it's so damn cool.And kudo's to the author for an awesome Instructable.
Halloween Hand Grab Scare / Floating Head Illusion
Laser Magnetic Field Mapping
Just FYI - While allowed by code, Refrigerators and Freezers should not be plugged into a GFCI circuit (surprised me to).There is a full description of the issue here: http://diy.stackexchange.com/questions/105118/when...
How do you handle the fact that if you have tracking turned on for your regular Android phone you can't separate the GPS tracks from a second phone on the same Google account?
Great Instructable with a lot of good points.Do you think that you could post a note about your Spindle as it doesn't appear to be just a Router without the handle and any tips or ideas about souurces would be great.. Thanks
Great write-up, Very clear and helpful with the power calculations and layout tips. One thing - Can you tell me about the plastic corner profile strips (link ?)
Most likely Kaizen-Foam (available on Amazon)
LED World Map/Clock