Tell us about yourself!
judging from the errors, confusion and comments its best to browse over to the ORIGINAL Carson and build that. The only praise i have for this modification of the Carlson is the use of plumbers copper tube.I will build the the Carlson and substitute the copper tube in place of the alloy heathkit probe body that was used.
i reordered replacements.Strange think is I have tried to run my heated car seat cover with various pc laptop switched power supply's and they just dont work.Why is that? The car seat is same as vest with wire.The seat is rated 50w but even a 90w supply wont heat the seat cover.I tried a 12v 6a LED power mains supply and that wont run the seat.The seat runs when its plugged into car cigar socket ok.So Im baffled?
battery new tried 2 both 3.3 volts
I ran a test using 12v mains switched DC power supply 240vac to 12v dc to led rf module and the output to a 12v car interior light and tried a 12v halogen bulb both of which just light up but the remote has no effect with any of the buttons not even on/off.Tried 2 new battery but one thing I notice is that small lamp on the remote will flicker when pushing buttons but very faint and not visible in daylight but in the dark its very low light.Maybe remote is faulty and or the module?
never shorted thats for sure.halogen 12v 36wineterior car bulb 12v 7w
Hi I tried this pwm controller from ebay but it doesnt work? are there any circuit modifications needed or?The remote has no effect for dimming or on/of
Top secret: Control a hidden usb port with a magnet!
How to Charge Any USB Device by Riding Your Bike
REVOLVE // A hardware-less coffee table
Arduino powered Moss&Solar Facade Element
Double Biquad Antenna for the 2 4GHz Band