author
1Instructables394Views6CommentsLebanonJoined March 26th, 2019
I am corporate identity & branding specialist and telecom is my hobby & I build things from time to time.
  • faditech commented on goaly's instructable Building a Ship in a Bottle.8 weeks ago
    Building a Ship in a Bottle.

    I always wondered how this things are made ! especially the masts & tied ropes.Excellent skills & Amazing talent ! Cheers!

    View Instructable »
  • faditech commented on hockeyidiot's instructable Lanyard Collage Bag8 weeks ago
    Lanyard Collage Bag

    Although it is a difficult project but very cute, I mostly loved your drawing (illustration) skills. Keep up the good work ! Cheers !

    View Instructable »
  • faditech commented on faditech's instructable Discone Antenna3 months ago
    Discone Antenna

    Hi tytowerThank you for your interest. As I said in the comments, I did not take lot of photos while doing the project since I did not intend to post it online, but a friend insisted.I will try to answer all your questions:1. Target frequency was 122Mhz and above and the rods are 2.68mm and I bought 11 rods from fix-it shop and there was no recognizable brand (Rods has the number 4043 on one side and 32 on the other side).2. As for the center element I will draw it for you in the attached image. (I soldered a copper wire and passed it through 3 layers of rubber (from an old tire inner tube). See attached pics.3. I followed this online calculator: https://www.changpuak.ch/electronics/calc_11.php4. As for the higher frequencies, it is determined by the distance between the plates (8mm) wh...

    see more »

    Hi tytowerThank you for your interest. As I said in the comments, I did not take lot of photos while doing the project since I did not intend to post it online, but a friend insisted.I will try to answer all your questions:1. Target frequency was 122Mhz and above and the rods are 2.68mm and I bought 11 rods from fix-it shop and there was no recognizable brand (Rods has the number 4043 on one side and 32 on the other side).2. As for the center element I will draw it for you in the attached image. (I soldered a copper wire and passed it through 3 layers of rubber (from an old tire inner tube). See attached pics.3. I followed this online calculator: https://www.changpuak.ch/electronics/calc_11.php4. As for the higher frequencies, it is determined by the distance between the plates (8mm) which was not my concern, my focus was on the Lower Frequencies only.

    View Instructable »
  • faditech's instructable Discone Antenna's weekly stats: 3 months ago
    • Discone Antenna
      198 views
      4 favorites
      7 comments
  • faditech commented on faditech's instructable Discone Antenna3 months ago
    Discone Antenna

    Thank you @seamstr, I did not know I was going to post it here, a friend recommended I do so, if I knew I would have drawn better schematics and taken better pictures.

    Other Antennas I builtDipole 144Mhz / Dipole 430 Mhz / Monopole 433 Mhz / FM 90° V / Dipole 144Mhz

    View Instructable »
  • faditech made the instructable Discone Antenna3 months ago