Tell us about yourself!
Popsicle Stick Tensegrity Table STEAM Activity - Easy to Assemble!
Hi! First: Thank you for this nice model. So my question is: You wrote to use 65lb. paper - which is in Europe 175g paper. Hard to find - do you think also 200g paper will do it?
Card Stock Sport Glider II
Tinkercad Robotics for School: Evil Zipline Robot!
Thank you - everythings fine now - I already printed all the stuff and the body is glued together. Will post pictures, when finished.But there is always a last question :-) : Do you have the complete body also as STL? I was just thinking to give it a try and print it all in place. I think with some supports my Prusa can handle it - what do you think?
Mason Jar Astronaut Sensor Light
Pixelated Clear Epoxy Table
GoodBoy - 3D Printed Arduino Robot Dog
Electronic Affirmation Mirror
Leather Handbag With Wooden Sides
Finally I've all the parts now, not that easy in these times! I've used grey cardboard, seems also to be ok for now, but I've not assembled it up to now.I've also used the 8BitDo SN30 - here a info: It has to be started in dinput-mode (B+start-button, once it is on press select for 3 secs for pairing mode).A question also: You wrote water free paper glue for microwood - do you have a sample-manufacturer for this? I'm not sure what to use here and the microwood isn't that cheap for experimenting. Thanx!
I'will definitly do - currently waiting for the rest of the needed LED's - and to get a reservation at my makerspace for the laser.
Hi, it's me again: It figured out, that my SPI-display, which is a readymade 32x8 the orientation of the text is wrong. The text runs from the bottom to the top - on each 8x8 tile is the same text shown with a short delay.In the correct version the characters had to be turned to the right for 90degrees. I do not want to break the 32x8 to 8x8 and resolder it if I can solve it in the code - or in a library - but how? Thx!
Finally I solved my issue: A package was missing - called libtiff5. I'm not sure if it makes any difference, but I uninstalled and installed Pillow as a first step:pip3 uninstall Pillowpip3 install PillowThen I installed libitff5 usingsudo apt install libtiff5And - Tatataaaa! - now no more error-messages, game starts - Brilliant!
Wooden LED Gaming Display Powered by Raspberry Pi Zero