Tell us about yourself!
There's a vertical wooden brace on the underside, that somehow evaded any of the images... 😀
There's a vertical wooden brace on the underside, that somehow evaded any of the images...
DIY LED Based Neon Open SignView Instructable »
Thanks so much, jessyratfink!
Thanks for the kind words!!
DIY Pallet Wood Resin Desk With Smart LEDs!View Instructable »
Thank you very much! And I'd say solderer extraordinaire next time... :)
Yes. Nice find! The wire I used had the white and blue wires swapped, so in order for the wire to sit more flush when the heat shrink was applied, I swapped the wires, but then made sure to swap the same wires on the color controller. This is not totally recommended as it's easy to get confused, but I wanted a cleaner connection area for my application. Since they are both ground voltage, it technically doesn't matter if they are swapped, but the colors would act different if you forgot to change on the color controller.
Soldering RGBW and RGB LED Strip TapeView Instructable »
Thank you very much! It was a fun project.
Thank you! The artwork doesn't really have any meaning, but it was inspired by waves and flowers. Just was trying to get something to be relatively organic, but without many defined shapes.
Custom Illuminated LED SignView Instructable »
Thank you very much! The "doodle" on the wall was a sketch from a piece of paper, which was then projected on the wall with a projector and laptop. Sharpie was done first to draw in the lines, then black paint with a 1" paint brush filled in all the strokes. That was a long project in itself, but the projector was the key to making that work!
Hexagon Infinity Mirror With LED Lights and Laser WireView Instructable »