jimkan

I have got this Bluetooth robot work just fine but your GPS Guided robot code compiled without errors but Serial communication is not working. Bluetooth connection is fine, serial console does not show anything.

Hi OUTATIME88, I was able to run your Bluetooth Robot but with your GPS Guided Robot bluetooth connected but controls are not working. it looks they both use the same code but the GPS one has no control, nothing is happening when press Forward, Reverse, Left of Right. What can be a problem?Thanks,

Hi 271828, I am using BGC 3.0, upload the program fine and Joystick app show voltage changes but that is all, no activities on motors, button one and two seem to do nothing. The board I use does not have an INT is this why it's not working?

yes, you were right, after hooking up the Bluetooth module the motors started to response with the movement of IMU but they don't response to the updated android app, is the older version of the app like the one you posted here still available?Thanks,

Before putting everything in place, try to hook up all electronics load up the sketch without problem, can see IMU values changes in serial console but motors are not moving at all. Any advise?Thanks,

Help! can't login with correct user and pw, I am using ESP8266-12E, Thanks!Connection: ESTABLISHEDGot IP address: 192.168.11.123220 smtp.gmail.com ESMTP h65sm28209114pfg.15 - gsmtp250 smtp.gmail.com at your service334 VXNlcm5hbWU6501 5.5.2 Cannot Decode response h65sm28209114pfg.15 - gsmtp502 5.5.1 Unrecognized command. h65sm28209114pfg.15 - gsmtpError sending message: SMTP AUTH error

This works, Thank You!