Tell us about yourself!
- kekker70 made the instructable Hand Carved Wooden Pencil
- kekker70 made the instructable Tiger Tail Pen + BonusView Instructable »
Made this from My Pine Tree..
- kekker70 commented on natedgreat's instructable Solar Powered Compost Drum SystemView Instructable »
If you make Two Compost Barrels and fill the first one with Grass and Yard waste, turn it every day for a week, then after the First week fill the second barrel with grass and ward waste. now you turn Both Barrels every day. at the End the second week empty the First Barrel as it should have been "Cooking" for Two Weeks. now that you have everything working right you fill the First Barrel you just emptied and keep turning them both, at the End of the week Empty the Second Barrel and then refill it. just keep going like this all season long..
- kekker70 made the instructable What to Do When You've Sliced Your Finger.View Instructable »
Table Saw, cut through the Bone, the Pin to hold the end on goestoo the Second Knuckle.
- kekker70 made the instructable How to Open the 61637 Titanium Nitride Drill Bit Set Index BoxView Instructable »
Thanks, I got it open.
- kekker70 made the instructable Scaled Up Toy TrainView Instructable »
I this from Black Walnut & Linden Wood.
- kekker70 commented on SJG98's instructable Scaled Up Toy TrainView Instructable »
Really nice, I would have made this but I can't work in Metric.If it was in Inches also I could understand it better.
- kekker70 commented on LTDWoodworks's instructable Thin Strip Jig for the Table SawView Instructable »
Thanks, I use a lot of thin wood & this will saveme a ton of Money.
- kekker70 made the instructable Chainsaw ArtView Instructable »
Almost, but all i had where 2X4s
- kekker70 made the instructable How to Make a Leather PenView Instructable »
I Do the Leather Pen's Also!!
- kekker70 made the instructable Leather PaintingView Instructable »
Tooled and Painted with Acrilics
- kekker70 made the instructable Tanning Rattlesnake HideView Instructable »
If you have any Extra Skins I will 1-2
- kekker70 made the instructable Easy and Realistic DIY MaggotsView Instructable »
Great Idea, I will make Fishing Flies this way
- kekker70 made the instructable How to Make a Knife SheathView Instructable »
I made this Sheath for my knife and a Spark Striker.
- kekker70 made the instructable Medieval Leather Needle CaseView Instructable »
I Made this one with the Rough Leather out, wish the Instructions were in Inchesit would have been SOOO much easer, Decimal & Metric is hard on Old Americans. ;~}
- kekker70 made the instructable How to Make a Leather PenView Instructable »
Try Different Types and Colors of Leather.
- kekker70 commented on Noodleworks's instructable Stacked Leather Knife HandleView Instructable »
I also make Pens the same way
- kekker70 made the instructable Turning an Acrylic PenView Instructable »
Try Leather, time consuming but looks great.
- kekker70 made the instructable Cardboard PenView Instructable »
Great Info, I have been wanting to use Epoxy over a Snake Skin glued to the Pen Tube like what I used to be able to buy, can't get the Blanks anymore.
- kekker70 made the instructable Dealing With Planer SNiPEView Instructable »
I made a Planer Cabinet that the ends open up and make a Infeed & Outfeedtable about 3 1/2' long, Each. adjust the Planer Hight so the wood goes in and comes out at the Hightas Planer. No more Snipe
- kekker70 made the instructable Handmade KnifeView Instructable »
I made this out of 3/16 " Flat Steel & My Deer Antler.
- kekker70 commented on FreddyXYZ's instructable Pen MakingView Instructable »
Good info, I also make pens, these are Rattle Snake Skins
- kekker70 made the instructable Turned Wood PenView Instructable »
I make Pens also, I'm in Utah
- kekker70 commented on AMbros Custom's instructable Stone Carved HeartView Instructable »
Very well done, may lives be blessed.
- kekker70 commented on CrazySurvivalSt's instructable How to Make the Simplest Metal FoundryView Instructable »
This and others like it would Great and Easier to make if it was NOT in METRIC!!I don't use Metric & Don't understand it. Can you put both Measurements in yourPlans for the rest of us???
- kekker70 commented on benfarhner's instructable Cheap and Simple Ball MillView Instructable »
I Shot a .50 Cal Hawken, so would .50 Cal Ball's work??
- kekker70 commented on RangerJ's instructable Build an Automatic Shop Vac/ Power Saw SwitchView Instructable »
Around Christmas time stores have Out Doors lights controlled using a Remote. the remote is the Plug in for the lights, and comes with a remote control to turn the switch on & Off.I have been using mine for over 6 years to turn on my home made Cyclone Dust Collector.
- kekker70 commented on TwoDudesMakingStuff's instructable Seashell PenView Instructable »
I tried making this, and yes BLOWOUT!! So I made another but used my Angel Grinder, NO BLOWOUT Works Great!!
- kekker70 commented on TheRedsmith's instructable Making a Japanese Pocket Kiridashi With Leather Sheath (which Is Also a Handle)View Instructable »
Why is it so Hard to put the Measurement's in Inches as well as Metric? I'm 73 and Don't do Metric.
- kekker70 commented on Daniel Stabile's instructable Medieval Leather Needle CaseView Instructable »
There are some of us in the States that Don't Or Wont or Cant use Metric, please use Both! would have been a nice Project to do.
- kekker70 commented on Kris82's instructable Zero Clearance Router FenceView Instructable »
What most wood workers do not relies is a Router Bit is ROUND, you clamp a Fence at Any Angle, it will still route the wood you place against it. you don't any thing fancy or costly.
- kekker70 commented on Loubie3D's instructable The Assembly of Sir PigglesbyView Instructable »
Loubie3D, this Great, but I don't have a 3D Printer, but I am going too try CarvingHim from BASS WOOD. I will let you know how He comes out, Thanks for a Unique project to work on.
- kekker70 commented on ffrisell's instructable DIY Stacked Leather Handle Bowie KnifeView Instructable »
I make the Bolt Action Pen's with Leather.About the same way you stack on your knifesI glue to the tube and turn on my Lathe. Now I need to do Your knife handle.
- kekker70 commented on mdavis19's instructable How to Pan For GoldView Instructable »
At $900 an oz. that must have been a while back as it is $1345.00 now.I had an idea that the least gone over area's for gold are where there is NO Water. So, I came up with my own Sluice box, fully self contained. I like arroyos/ a dry river type bed, they only get water when a lot of rain washes down from the hill's and mountains bringing Heavy Metal with it. My Sluice works by reusing the water over & over, I have used it Two Week's and not ran out. think about making something like this and build one.
- kekker70 commented on groovymama's instructable How To Get "Free" EggsView Instructable »
Home raised Egg's V Store Egg's; Have you ever stopped to think why store Egg's need to be refrigerated & not BEFORE refrigeration? My ancestors gathered there Egg's in a basket and just set it on the counter, NO refrigeration. when a chicken lay's an Egg it is coated with a substance that dries fast and seal out Oxygen from getting in and causing the Egg to start breaking down. Egg producers have to wash all the Egg's for cleanliness, without that coating they have to be refrigerated. Farm Fresh Egg's need no refrigeration and can last for Months. To get store Egg's to last that long Without Refrigeration wash them, dry them and put a very THIN coat of Mineral Oil on them, we bye 5 Dozen at a time and do this. Our Egg's only last us about 3 month's but are still fresh to the LAST EG…
see more » - kekker70 commented on MiiBooth's instructable Make your own charcoal at home (Video)View Instructable »
PattyP17I don't use wood fires to make Charcoal, I use my Coleman Stove, or Propane Stove. I make my Char Clothe the same way, it's cheaper and easier as well as faster.
- kekker70 commented on Eddie the Invemtor's instructable Salt Water PurifierView Instructable »
Use Strike Any ware Wood Matches, go back of match head 3/8 " and put a mid to large gob of HOT GLUE on the stick, let Fully cool. to use, Strike the Match, hold it out striate and let the flame burn back and Slowly melt the hot.. use as needed.I have at least a Dozen in my Bug Out Gear, my truck, my car, even my Hunting and fishing geer.
- kekker70 commented on henryric's instructable Build a Shopping Cart Cargo BikeView Instructable »
Sooo, did You BUY the Shopping Cart?
Pen & Pencil, same idea on the Pencil but I add 1/2 inch on the Top Endso it looks like it goes all the way through...