author
43Comments

Tell us about yourself!

  • kroome commented on coberfranc's instructable 16x16 RGB LED Panel Arduino Projects14 days ago
    16x16 RGB LED Panel Arduino Projects

    great !!! nice... try also "JINX! " software...

    View Instructable »
  • kroome made the instructable Simple DIY Volume Control Knob!4 months ago
    Simple DIY Volume Control Knob!

    i was successful with this instructable but if you are using encoder mounted on PCB with resistors, make sure to traced button connections,.... if you follow trinket's schematics with MUTE option, then you have to modify button connection on the encoder... take note that one pin of the encoder is connected to GND, therefore , you need to transfer it to (+)... that's the reason why those who posted below were having problem on MUTE option...

    View Instructable »
  • kroome commented on Kris S's instructable Simple DIY Volume Control Knob!4 months ago
    Simple DIY Volume Control Knob!

    here's a reference from this post.... pls navigate to his previous "USB HID VOLUME CONTROL"... hope it will help...

    if you are using encoder with built-in resistors, one pin of the switch is connected to ground therefore you need to transfer the connection to (+) ... just traced the pins of the button switch to make it sure...

    if you are using encoder with built-in resistors, one pin of the switch is connected to ground therefore you need to transfer the connection to (+) ... just traced the pins of the button switch to make it sure...

    View Instructable »
  • Arduino LCD 16x2. Turn Single Screen Into Multiple Screens.

    great !! nice and simple tutorial... cheers...

    View Instructable »