Tell us about yourself!
Thanks. I have worked out the piece arrangement and drawn it up. Looking forward to making the knot.
I have Looked thru the instructions but have not found a layout for the different pieces after the assembly. Is there a plan layout for each assembly?
I understand that you twist 15 inch of the 6 wires you remove from the bundle, but are they ever used in the final project? I do not see them mentioned later in the project. What is the purpose of removing them and twisting 15 inch of the 6 wires if you do not use them later?
I think I understand. You really do not remove the 6 wires, but twist them and leave them as part of the bundle. You then repeat this with another 6 wires and repeat until all the wires have been twisted. You then take the complete bundle (all wires) and twist them together. I think that will work. I suggest you put a wrap of tape above the 15-inch before you remove the 6 wires, and so on. The 6 wires remain in the bundle. I will do it and find out. The result is that the trunk of the tree has rougher bark than that above the 15-inch point. I have ordered the wire and will reduce the size by about one-half. Sorry I missed this during my previous reviews.