Tell us about yourself!
C'est excellent. Juste une question pourquoi pas avancer la carte raspberry pi et de ce fait connecter les USB en interne ? Sans avoir de connectique externe qui peuvent être arrachée est pliée.
OK I understand better, you have perfectly understood my question. maybe there is another way for next time to do with a usb signal switch or while retractable. anyway it's a well done project. thank you for his writing and sharing
Hello hiroyoki you can use other arduino and connect to a4 and a5 or use dedicated Sda Scl on PCB. you can use modified library (this oled is an SSD1306) see here for an test with temp ==>> https://projetsdiy.fr/test-shield-oled-wemos-d1-mi... verify again you connection with multimeter and Diode continuity test. verify the connection with pin and resold with flux
Hello verify the i2c adress. is (chinese oled (mine oled is 0x3D) but with code is 0x3C modify on void setup
hello i sent to you SimpleTimer and Blynk library. recompile. i hope for you thats work
hello dear friend. it's not my project. and I am not developing. on the other hand I suspect that you do not have any library to compile your proram. I miss you I think the library "pgmspace" or you have add instructions to the code. I do not have the same error but this line indicates that you do not have the required file. you must download a PGMSPACE library. look on google or here: https://github.com/adafruit/Adafruit_SSD1306/issues/26 and test a different version of arduino first. like the 1.6 or 1.6.3 (I think) because sometimes ardino version can not compile some sketch too old or not updated. also think compiled for the correct card esp8266 having to add the card in the card management menu.
Hi if the same version of mine. I attach a version of installed version in my pc. I left new comment in one or two days.
i have send to you the sfe_micro oled. i not have the sketch sorry.
I will not do all the details sorry but you can find the information on the sitehttp://www.blynk.cc/getting-started/and explanations are simple. Developer as comment the code in the .ino file. And google is your friends
Great design. Simple, easy, cheap, Diy and beautifully lamp ~_*
How to Attack WiFi by Pocket 8266
Arduino 6 Wire Stepper Motor Tutorial
Hi the name of your daughter is cool :-) yes the blynk app work great with you instruction. work in 5minute with your job thankx
Amazing JOBReally Good job thanks for sharing with us. see result of your job.
Great product i make an wall outlet with arduino pro micro 2led and bluetooth hc-06 and one relais. But you idea is most powerfull. Your adition (thermal fused + 1switch to control all) is very great. Great diy with esp8266. I am debutant in arduino and electronics and the esp8266 is more complicated for me at this time. But i will made your idea after. (Eye blink on switzerland connector outlet)
Oh anyway. It is hoped that you will succeed in selling or licensed your project to Chinese factory to produce led cube in polyacrylate has lower costs. Its still a great project. Really well realize is very miniaturized. A demo video will be a great idea. More I do not understand English very well, but your instructable is very well explained is very concise. It is really a very big research and test work that you have roughly well conducted.
Amazing instructable, very great project. I WILL BUY ONE !!!
LED Cube Pendant - Worlds Smallest LED Cube
Very fun an good Work. thankx
Work Great on leonardo With SSD1306 Oled 0.96 display (with minor change) thankx
Electromagnetic levitation device
Transfer Photograph onto Wood
Power Drill to Belt Sander Conversion
Display Temperature and Humidity and upload to ThingSpeak
Cell Phone Night Vision - Under $10
Make Your Own Thermocolor (Color-Change) Paint!
How to interface with OLED 0.96inch LCD128x64
Old PC Recycled Regulable Power Supply
Hard Disk Clock (HDD Clock with Arduino Uno)
555 Timer : Universal PWM Controller
Using a temperature sensor to control the speed of a motor using arduino
Arduino Wireless Weather Station
Supercapacitor Joule Thief
Mini weather station with Attiny85
DIY RELAY MODULE
Powerduino - 1$ Powerbank