paul Fast post

Thanks, I am glad you liked it.

HOME MADE SIGNALS MADE FROM LEDS AND DRINKING STRAW BY PAUL FAS POSTThese signals have been made from leds and drinking straws and card. The straws were cut to size, I model in OO scale or 1/76. The leds are bezels or pre wired I soldered wire to them, then painted the wires red or green to help assemble the signal later on. I might add do not use teeth to strip insulation or a painful trip to the dentist may result. I assembled the signal head out of card and painted it black. I made holes in the card to thread the wires through. i used 2 on/off switches to control the signals , I wired them so that when one signal shows red the other shows green.