Nice work, looks great! I’m glad you got some inspiration for your project from this. :)
This is great! I love the addition of the pedestal, and that you made the graphics unique for your build. I'm glad you were able to grab inspiration from mine!
This is great! Nice work!! Unless those are the "all-in-one" buttons (and they look like they are, so probably ignore this) you should be able to buy cherry switches and flip them out. Love the trim on the marquee! Do you envision any issue if you have to service the marquee leds?Would love to see more shots both inside and out!
Looks great! I love the rupee joystick topper!
Ambilight System for Every Input Connected to Your TV. WS2812B Arduino UNO Raspberry Pi
Reclaimed Pallet Wood Sandwich BoardView Instructable »
Fantastic! The idea of the routed grooves to set the pieces into the sides looks great. I am working on a new one with a CNC machine that will be all wood as well, and I might try and incorporate that into the design. How did you end up tackling the control board regarding hinges and/or magnets?Well done! Can't wait to see the finished product!
Makedo Dinosaur Costume From a Sun Basket Box
Sounds awesome! I like the idea of the hinged control board. I've been adding magnetic catches on the control boards for new ones that I've been building. Pardon the crude mockup, but here is an example of that. It makes pulling the control board a lot easier for servicing. Hinges would complete that thought, so I might go that route in the future.My new ones have been 24" wide as well, and the extra room for two people is great.Can't wait to see your final build!
How to Build a MYSTIC From THE DARK CRYSTAL
Here is the link to the marquee: https://www.dropbox.com/s/grmtc99wj5bu22k/zeldaCabinet_marquee_20x5_PRINT.eps?dl=0I would pocket from the bottom for the joysticks so it looks cleaner.As for the 5/8 channels in the side panels for the monitor/control board/back, I think that's a great idea! Would be a lot cleaner and less work than attaching all the wood blocks.Let me know if you have any other questions, and throw some pics of your build in the comments when your done! :)
Based on your specific materials, and whatever bells and whistles you wanted to run with, it would vary. It could be done very cheaply if sourced properly!
From this seller on Etsy:https://www.etsy.com/listing/167668842/steampunk-gauge-face-antique-brass
That looks fantastic! Nice work!
Thanks! That is a grille for a 3" speaker that is attached under it.
Per your dimensions in your direct message, here are the marquee, control board, and screen bezel graphics at 24" wide. (with a 0.25" bleed on all sides)I took the middle out of the screen bezel so you can cut your own out based on your monitor's actual size.Let me know if this doesn't work for you!Screen Bezel:https://www.dropbox.com/s/elx6ufqttztwc09/zeldaCabinet_screenBezel_24x18-75.jpg?dl=0Marquee:https://www.dropbox.com/s/ki9jxdijebqsr2h/zeldaCabinet_marquee_24x5_PRINT.jpg?dl=0Control Board:https://www.dropbox.com/s/jptxf7021sc684m/zeldaCabinet_controlBoard_24x10-5.jpg?dl=0
Yeah, that works! I ran 3mm fiber optic lines from the leds on the battery pack through the front of the box, then put hand-blown marbles in front of them to diffuse the light.
A lot of this is already developed. I didn't want to put a camera and mic into the mirror for security reasons, but the modules are out there.Here's one for Alexa control: https://github.com/joanaz/MMM-MirrorMirrorOnTheWal...A few for voice control: https://github.com/fewieden/MMM-voicehttps://github.com/alexyak/voicecontrolhttps://github.com/dr4ke616/MMM-Voice-ControlFacial recognition: https://github.com/paviro/MMM-Facial-RecognitionReally, the sky is the limit as far as development, as it's basically just a web server. :)
Not hard. I mean, you could just run a full screen video playlist on the Pi for the evening instead of the MM platform.
Love it. How about a tiny steam pipe coming out of the side that puffs steam when an email is received?
That's a great idea! The fan covers on the sides would be easy to flip out. I'd just need to find large enough gears that matched the other bronze ones.
Muchas gracias! Fue divertido crear.
I bought this set off of Amazon: http://a.co/3WF8CgN
I have my decals and plexiglass backings printed at a shop in Kansas City called Signs By Tomorrow. Any sign shop that does vinyl decals should be able to tackle it. I've also seen suggestions for vehicle wrap shops, so that might be another good avenue to check out.
I got the gauge face and switch plate from this Etsy seller: https://www.etsy.com/shop/VintageWireI found the gears on Amazon. This is the set I used: http://a.co/ay43m8F
Thanks! I just added it. :)
I put a keycap set on a mechanical keyboard. This is the set I found on Amazon: http://a.co/3WF8CgN
Definitely! Something like the mirrors from the Ghostbusters movie would be cool. Or I saw a video a while back that was a portrait of a Victorian woman that "came to life" as a ghost randomly.
Ornate Magic Mirror
Steampunk Raspberry Pi Laptop
Hi! Thanks for the interest! I have made a few on commission and am open to take another one on. These are custom built to whatever design you want to see and take about 3 months. They are $1,500 each with a $500 deposit down to secure the build. I live around Kansas City, MO, so if local pickup isn't an option then freight shipping would be added to the price.I attached images of some other ones that I have built for your reference.Let me know if you're still interested and we can talk more about it!- Robbie
Whoops! Here is the link to the marquee:https://www.dropbox.com/s/grmtc99wj5bu22k/zeldaCabinet_marquee_20x5_PRINT.eps?dl=0
Here are new templates! I left the marquee and monitor bezel out because those are just rectangles and you will need to measure the monitor hole and marquee spacing based on your build anyway. The side template is only one side but you can flip the canvas to mock up the other side.I put the control board in here with properly sized button and joystick elements. I hope these help!Cabinet Side (24x36) - https://www.dropbox.com/s/uikmejxd4iopz63/cabinetS...Control Board (10.25x20) - https://www.dropbox.com/s/e5ocn6jhz6hhers/controlB...
Wearable LED Matrix Face Mask
Make a Sweet Portable Guitar Amp
[DEPRECATED] Arduino-Based Smart Glasses by a 13-year-old - Jordan Fung's Pedosa Glass
SMART POWER OUTLET
WiFi Enabled Puppy Condo
Arduino Run Accurate Liquid/Powder Dispenser System
Intro to LED Strips
Raspberry Pi Arcade Game High Score DIsplay for Multiple Locations
Start A Back Yard Honey Bee Hive
Arduino DUE Guitar Pedal - Open Hardware.
Power Glove 20th Anniversary Edition
WiFi security in Home and Office
Fiber Optic Panel Star Ceiling
Zelda Pixel Art Coffee Table
Acrobat Cable Cam
Coco-Mic --- The DIY Studio Quailty USB Mic (MEMS technology)
Autonomous / Voice Controlled - 3D Scanning Rig For 3D Printing
LED CUBE CODE GENERATOR 4x4x4 Arduino
Wahduino - WahWah by shaking/raise the guitar
The Punchout Interactive Interface Improved
Homemade SNES Arcade Machine
Solar Power Supply V3.0
Lithium Heavy Duty Solar USB Charger 2.0
Solar Power For All usb Gadgets
LED Control using Arduino Bluetooth and Android. (Part 1)
How to make a Raspberry Pi Arcade with no programming
40W LED Grow Light
Build an Arduino-powered talking robot head!
Voice Controlled Arduino Lighting - Autobot
Ultimate Raspberry Pi Home Server
A watering controller that can be home networked
Uber Home Automation w/ Arduino & Pi
How To Make a Matchbox Rocket Launching Kit
Cubo de Compañia
NES bluetooth controller.
How To Make The Mini Metal Foundry
Stereo Speakers with Synched LED Lighting
Smart Homer Web-enabled TV remote
Multi-Functional DSLR Remote Control
Read/emulate remotes with Arduino and Raspberry Pi
Canon Wired Remote
Muiltple Wiimote mods all in One.
Street Light circuit using LDR
Intel Edison: Custom Doorbell