Tell us about yourself!
The image itself is 10"x10" (that includes a small margin), so the print does not need to be as large as 18x26. However, since I ordered it from Fedex Office with the laser cut, I didn't specify the page size per se. Instead, their laser cutter will use the very faint line around the image in the pdf as the cutting guide. If you cut it yourself, you should use that same line as your guide.I don't know if you can order it with the laser cut from their online site, but it was very easy to add that option when I ordered it in person at their store, and there is no way I could have cut it as cleanly by hand.Good luck with it! And do let me know if you have any additional questions.
Relief Map on a CNC Router Using Fusion 360
Mars 2020 ClockView Instructable »
Moon Lamp With Remote
Make Cutting Boards With Minimal Tools
Labyrinth Puzzle Box
RC Arduino Domino Layer With Bluetooth App Control
How to Clean Sticky Rubber
Plywood Power Carved Wall Art
DIY Compact 3D Printed Animatronic Eye Mechanism
Deep Hole in a Small Box, a Different Take on the Infinity Mirror.
DIY Interactive Animated Pumpkins - 3D Printed | Raspberry Pi
Mechanical-Digital Steel Ball Clock
ArClock - a Smart Display Wrapped in Real Wood
The Different Useless Machine
Concrete Chessboard Planter
Jet Propelled Radio Controlled Duck
A DIY Zipline Robot With Arduino, Lego, and 3D Printed Parts
Repurpose Old/Blown Light Bulbs
Continuum - Slow Motion LED Art Display
Refrigerator Magnet Clock
GorillaBot the 3D Printed Arduino Autonomous Sprint Quadruped Robot
Neopixel LED Face Mask
DIY Resin & Wood Coasters
Clockception - How to Build a Clock Made From Clocks!
How to Make a DIY Smart Mirror
Build a High Performance Inverted Pendulum Robot
Crack the Code Game, Arduino Based Puzzle Box
Rocket Ship Lamp
Lazy 7 / One
Mesmerizing Ferrofluid-Display: Silently Controlled by Electromagnets
Planetary Gear Clock
Mesmerizing Magnetic Wall Clock
How to Carve the Lunar Surface With CNC
Raspberry Pi Hexapod Wooden Robot.
Wooden LED Gaming Display Powered by Raspberry Pi Zero
CNC Etch a Sketch (and Video Player)
Spring Making / Wire Bending Machine
Glowing Air-Bubble Clock; Powerd by ESP8266
Simplified 3D Printed Animatronic Dual Eye Mechanism
HeadBot – a Self-Balancing Robot for STEM Learning and Outreach
Motion Follow Animatronics Eyes
Animatronic Eyes With Remote Control
Design & Build a Truncated Icosidodecahedron!