rpotts2

Touché, good sir!!

https://youtu.be/zRzsUVXXMyE

Voting. Most useful gardening project for my needs. My indoor plants are starting to get unmanageable: I have a few with sentimental value that I JUST rehabilitated and they have to be watched like a hawk for proper moisture.

Nice! where do you get bottles? Like are those drink bottles or condiment bottles?

You're just using another form of carbohydrate to feed the yeast. Molasses may be easier to dissolve, but it's also more expensive. Also, its your choice to drink bedbug water. Perhaps if it weren't a funnel trap, but in this form? Nope...I think the most important thing is to use non-chlorinated water. To that end, if all you have its tap water, pour it in a pitcher, and let it sit for a day. The chlorine will outgas.

pretty nice! I've been hesitant about doing one of these because all the other ones I see are rewiring the elements. Do you get the same granular PID control with simply rewiring the main power cord? How are the top and bottom heat zones?

There's always the elephant in the room: The Prison Wallet...

Beautiful!

Wow! That's really nice! with some mods that would make a beautiful desk...

Nice. Make that in metal and sell as a DIY kit.

That's a keeper... LOL!

nice model! Slipstream is a much under-appreciated movie! luckily, I found a DVD copy in a bargain bin sale.

Is this a "yank & bank" style of control?

Stumbled over here looking for PCB tutorials. I always enjoy seeing a new 'ible from you! can wait to see the video!

Ask on August 22

Interesting article!Please reconsider your choice of punctuation!

can you add a URL to link from Instructables to the video (I can't seem to find one)? this is the first time I've seen someone building the same thing I had an idea for, and I would really like to build this.

Very nice. I've always been a fan of this look.

Man! Almost 50 years old and I STILL have never gotten these things, LOL!

Awesome again!

Nice. mine are still tiny jumbled of spaghetti. how are you connecting that usb to the atmega? is there a chip on the underside of that little board? I known you can bit-bang the serial, but that can be somewhat slow.

pretty neat idea. I'm not in a good locale for it, but still a good idea.

that is a pretty cool build. favorites.

you can order thru Thingiverse. if he put the stl up there. otherwise, just get his permission to take the file and send to someone with a printer. maybe toss him a bone or 2. I love watching his videos. very imformative!

What? no swagfile? LOL!Well written!

Nice! I'm wondering if I can modify my Meade to do this? it looks to be about the same size. it's just the spider is in a different locations for the focal point.

Nice 'able! these things almost BEG for 3d printed housings now. come to think of it, I might need to design bodies again. I did it years ago with balsa.

also the motors weren't enclosed, so you could rewind the wiring, change the graphite commutators, that sort of stuff.

Nice. Mine were yellow back in the day. I used to open them and stretch the spring, then mod the trigger for longer movement to get a little more speed from the wiper. Don't know if you can still do that.I think I had the original G-plus cars. Back then they were either specific popular muscle cars (57 Bel Air wagon, etc) or driver branded racers. My fave was a Jackie Stewart F1.

Good write up on how to reverse engineer hardware!

VERY nicely done!

Huh, never thought about the folding part that way. I'll have to try it! as for the stake, I have one but it never occured to me to keep it handy for when I'm done. 1 last thing, I'm thinking about modding it to see if I can make it a 4 line kite for the braking. been poring over many photos of different kites and I think I got the design down. No biggie if it ruins the kite. I have another and the Christmas haul was good this year. there's some really nice packages available.

my biggest problem is when I'm done flying. landing a 2 liner is easy. keeping it from tangling while you retrieve it and try to fold it back up in the wind is a pain. maybe that problem is just a feature of eBay specials. I'm dreading the MESS my 4M foil will make when I replace the cheapo bridle...

So, this circuit will allow me to keep my Li-Ion batteries from blowing up during charging?

I have NEVER had any luck with this. Looks really nice...

Nice board! I'm curious why you included 2 crystals though...

Nice 'able! on step 3, a little trick you can borrow from bike shops is to spray hairspray inside the handle grips. they will then slide on easily. When the hairspray has dried, no slipping at all!

The closest thing to what you are talking about is called a "rocket stove". I DONT know if even THEY get hot enough.

Nice! Always good to have options...

kind of late here, but you probably need a hollow ball that splits apart. you would dump your stuff in, close it up and spin it round like a glass blower.

Don't forget: tell a story about an old sea captain, as you're folding the boat. when done folding, talk about the captain wrecking and how (as you tear each corner off) everyone was lost. when you unfold, you will see all that was found was the captains t-shirt. its a little trick my grandfather taught me years ago.

Neat idea! perhaps you could flesh this out and make it last longer. it's probably burning out LEDs if you don't have a resistor limiting the current they get.

LOL! I see you've already published this from your YouTube video. already liked it!

Nice 'ible! I have a small container that I made from rosin gathered on a hike. I think it may be easier to harvest if you cut the tree a bit (nothing huge, just an inch or so) and just wait a while (days or weeks). if you plan far enough ahead you can harvest the brittle stuff.

Nice! Wish I'd seen this a few weeks ago. I probably wouldn't have struggled as much on my VW.

Problematic for me, as I am in the mid-Atlantic region and it is ALWAYS humid. I'll have to try it next year.

that's what has always gotten me: finishing too soon. didn't realize something like Ly-Sol would would work.Nice 'ible.

Always loved seeing these gags. nice molding technique...

Agreed. Heck with the cables! I want to know about the paint job and show my daughter...

could you reshoot the photos? most are either too dark or extremely out of focus. the design is nice, I just need to see the photos.

Nicely done!

LOL!!!! +1

I always wondered how green clay was made!Just so you know, pure clay kitty litter is bentonite (see step 1). I found that out while reading up on cobb ovens.

oh! it was just getting good! where are steps 6 thru 9?

so that sensor is the food-grade sensor? I like the neatness of your setup.

nice! can you explain how to serve with a side spin? I can see my friend "chopping" the ball when he does it, but I have not been able to do it yet. puts one HECK of a curve on its trajectory!

very nicely done. by any chance have you thought about making a spreadsheet to be able to plug in some other dimensions and come out with custom bridle lengths?

Zoinks!!

Finally!!! I've been looking for something comprehensive that I could adapt for kite use! You've put it all together in one easy to read place!

LOL! The one constant in this whole 'ible is your wife coming behind you to fix something with the wood filler!Don't worry, it happens to me too...

This whole thing (except for the fan itself) could be built so that all electrical components are away from the box and reduce the chance of liquids spilling in. Or, you could just get marine-grade parts and a tube of silicone caulk.

LOL! #2, 3 & 4...

Been doing this for years, as I found that whole wheat flour make the cookies seem sweeter for the same amount of sugar. I also found that they dry out sooner, so you have to eat 5 at a time instead. I mean, you don't want all that work to be wasted do you?

don't tell. do another instructable. these are good!

A-frigging-mazing! I have ALWAYS wondered about stuff like thIS and you just gathered all this stuff together in one central reference. Definitely voting...

Added to my favorites too...