Tell us about yourself!
I only made the planar lid drawing, and there are a few holes missing. It looks like this. The file was made with Fusion 360, not sure why you can't open it. If it's good to you I'll reload with another format.
https://www.dropbox.com/sh/xylt5ls4d8f16fl/AAAfAoH...I made an incomplete lid only using the diagrams on this page. I don't know what angle each ring of holes should be so i just align them up the y axis.
Beautiful design by the way ! Hope to get it 3D printed soon.
Well, I didn't include the circuit diagram and the libraries for the LCD and IC595. Basically I used a shifting register (IC595) to apply voltages to the pins of the LCD, and I wrote my own library for those.The connections aren't standard, however you can connect them anyway you want and write your own library.
Nature Nanotechnology reports this DIY AFM (Atomic Force Microscope) / 自己動手做原子力顯微鏡 and DIY AFM controller get hacked