Tell us about yourself!

Complete Your Profile
  • srijan sehdev commented on PaulMakesThings's instructable Arduino Nano Based Microbot6 months ago
    Arduino Nano Based Microbot

    Forgot to attach this image

    View Instructable »
  • srijan sehdev made the instructable Arduino Nano Based Microbot6 months ago
    Arduino Nano Based Microbot

    So,this is actually my first project with arduino,that's why it's a bit messy .It has an infra red sensor and avoids obstacles that come in front of it.You might be thinking that why have I attached a "cut off mini usb cable" that's because my arduino doesn't work with direct power supply . it uses a 9v battery for its power supply . I have used the larger wheels because I damaged the smaller one. Mounting the wheels to the idler was a tricky part. I am planning to give it Bluetooth module upgrade. But anyway it was a great instructable! And special thanks to paulmakesthings for helping me out.

    View Instructable »
  • Tiny Smartphone Controlled Arduino Tank

    can a l9110 motor driver be used with this project

    View Instructable »
  • srijan sehdev commented on PaulMakesThings's instructable Arduino Nano Based Microbot1 year ago
    Arduino Nano Based Microbot

    can a l9110 motor driver be used with this project

    View Instructable »
  • srijan sehdev commented on PaulMakesThings's instructable Arduino Nano Based Microbot1 year ago
    Arduino Nano Based Microbot

    #include <nano tank>int rSpeed=0;int lspeed=0;Servo rightservo;Servo leftservo;void setup(){ Serial begin(9600); rightservo.attach(11); leftservo.attach(10); rightservo.write(90); leftservo.write(90);}void loop (){ if(serial.available()>0){ command=Serial.read(); stop(); switch(command)//these are the letters and numbers that app sends to the bluetooth module case'F': forward(); rspeed=200; lspeed=200; break; case'L': left(); break; case'R': right(); break; case'D' rightservo.write(90);//if disconnect turn motors off leftservo.write(90); break; } } void forward()//define what is forward { rightservo.write(rspeed=200); leftservo.write(lspeed=200); } void back()//de...

    see more »

    #include <nano tank>int rSpeed=0;int lspeed=0;Servo rightservo;Servo leftservo;void setup(){ Serial begin(9600); rightservo.attach(11); leftservo.attach(10); rightservo.write(90); leftservo.write(90);}void loop (){ if(serial.available()>0){ command=Serial.read(); stop(); switch(command)//these are the letters and numbers that app sends to the bluetooth module case'F': forward(); rspeed=200; lspeed=200; break; case'L': left(); break; case'R': right(); break; case'D' rightservo.write(90);//if disconnect turn motors off leftservo.write(90); break; } } void forward()//define what is forward { rightservo.write(rspeed=200); leftservo.write(lspeed=200); } void back()//define what is backward { rightservo.write(lspeed); leftservo.write(rspeed); } void left()//define what is left { rightservo.write(rspeed); leftservo.write(rspeed); } void right()//define what is right { rightservo.write(lspeed); leftservo.write(lspeed); } void stop()//define what is stop { rightservo.write(90); leftservo.write(90); }are these codes correct?

    View Instructable »
  • srijan sehdev followed TrevorB231 year ago
  • Tiny Smartphone Controlled Arduino Tank

    #include <nano tank>int rSpeed=0;int lspeed=0;Servo rightservo;Servo leftservo;void setup(){ Serial begin(9600); rightservo.attach(11); leftservo.attach(10); rightservo.write(90); leftservo.write(90);}void loop (){ if(serial.available()>0){ command=Serial.read(); stop(); switch(command)//these are the letters and numbers that app sends to the bluetooth module case'F': forward(); rspeed=200; lspeed=200; break; case'L': left(); break; case'R': right(); break; case'D' rightservo.write(90);//if disconnect turn motors off leftservo.write(90); break; } } void forward()//define what is forward { rightservo.write(rspeed=200); leftservo.write(lspeed=200); } void back()//de...

    see more »

    #include <nano tank>int rSpeed=0;int lspeed=0;Servo rightservo;Servo leftservo;void setup(){ Serial begin(9600); rightservo.attach(11); leftservo.attach(10); rightservo.write(90); leftservo.write(90);}void loop (){ if(serial.available()>0){ command=Serial.read(); stop(); switch(command)//these are the letters and numbers that app sends to the bluetooth module case'F': forward(); rspeed=200; lspeed=200; break; case'L': left(); break; case'R': right(); break; case'D' rightservo.write(90);//if disconnect turn motors off leftservo.write(90); break; } } void forward()//define what is forward { rightservo.write(rspeed=200); leftservo.write(lspeed=200); } void back()//define what is backward { rightservo.write(lspeed); leftservo.write(rspeed); } void left()//define what is left { rightservo.write(rspeed); leftservo.write(rspeed); } void right()//define what is right { rightservo.write(lspeed); leftservo.write(lspeed); } void stop()//define what is stop { rightservo.write(90); leftservo.write(90); }are these codes correct?

    View Instructable »
  • srijan sehdev followed Ynze-2 years ago
      • Electric Lighter
      • Tiny 80Watt Electric Heater
      • Tiny Smartphone Controlled Arduino Tank
  • srijan sehdev commented on PaulMakesThings's instructable Arduino Nano Based Microbot2 years ago
    Arduino Nano Based Microbot

    but why won't the servos receive signal

    but why won't the servos receive signal

    View Instructable »
  • Tiny Smartphone Controlled Arduino Tank

    what if i connect the servo signal wire to the wrong digital pin???

    View Instructable »
  • srijan sehdev commented on PaulMakesThings's instructable Arduino Nano Based Microbot2 years ago
    Arduino Nano Based Microbot

    What if I attach the signal wire to the wrong digital pin???

    View Instructable »
  • Tiny Smartphone Controlled Arduino Tank

    What if i connect bluetooth module directly to power source ?will it work

    View Instructable »
  • Tiny Smartphone Controlled Arduino Tank

    i just wanted to ask that how much GHz is it

    View Instructable »
  • srijan sehdev followed PaulMakesThings2 years ago