Tell us about yourself!
hello, I got other problem I want the pi and servo, camera can do the work when turn on the power , so add command in the rc.local but the servo no response , checked all possible issue , no idea is that the gpio issue ?the servo worked under command line
hello, I got other problemI want the pi and servo, camera can do the work when turn on the power , so add command in the rc.localbut the servo no response , checked all possible issue , no ideais that the gpio issue ?the servo worked under command line
checked the code , all same as post on github, where is the problem ? i use raspberry pi 4B
I made the live stream work, but when click on the button , I got :The requested URL was not found on the server. If you entered the URL manually please check your spelling and try again.that is flask server issue ?check the code , can't find the mistake .it cost me some days to do trouble shooting any one can help?? many thanks
I have the same issue , where you add these lines on the config file ?I use: alias.url +=("/cgi-bin"=>"/usr/lib/cgi-bin/"), but still not work got " 500 internal server erro "
I can make the cgi file working from command line, but can't make it working from web server , and from comments, some people had the same issueI saved the cgi file on /usr/lib/cgi-bin , but from browser , enter " http://192.168.1.xx/cgi-bin/lighton.cgi , got : " 500 internal server erro "waste 3 days and stuck on the issue , can't go aheadwhat is the root cause ? lighttpd configration ? or directory of cgi files on the index.htmlwould you please help ?thanks a lot
every time reboot the raspberry pi 3b the gpio pins shows " input "but I already changed all pin to " output " in the file any one can help ?thanks a lot
hi, john_03 I add the server.modules = ("mod_cgi",) still not work would you please share your lighttpd.conf file ?