Tell us about yourself!
I'm trying to be positive and constructive but some pranks aren't funny.
It also works pretty well to laser etch anodized aluminum. The etched area looks white.
Nice work!Back in the late 80’s I worked in a laser application lab inMassachusetts. At Christmas time I set up a moving table CO2 laser system to doa raster scan of black and white artwork. I set up a bar code reader parallel to the laser head. I would do a step and repeat raster scan with the table.When the barcode reader saw dark it would fire the laser. The laser head waspositioned above a piece of birch plywood. It did a very nice job reproducingthe artwork.
Here's a picture.
Saw set is a term applied to various forms of a tool used in the tuning and sharpening of saw blades. The saw set is used to adjust the set, or distance the saw tooth is bent away from the saw blade. Kerf: The narrow channel left behind by the saw, and (relatedly) the measure of its width, which depends on several factors: the width of thesaw blade; the set of the blade's teeth; the amount of wobble created during cutting; and the amount of material pulled out of the sides of the cut.It might be different in the U.K.
Cleaning and Finishing PVC
In my spray booth I have a bicycle wheel mounted horizontally. I hang the parts from the wheel. To turn the parts around all I have to do is spin the wheel 180 degrees. It made things easier for me.
Nice write-up. Thanks
Thanks for the reply. My neighbor has one. I think I'll borrow it and see what kind of destruction I can accomplish today.
I need to cut some square bottles. Any suggestions or hints would be greatly appreciated.
The rocker plate is a very nice idea.