Tell us about yourself!
as stated above, new printers do not come with much ink. That is for setup only and you have to buy more ink cartridges.
I was pretty sure I could do that but just wanted to make sure. Thanks for answer
Hello All. I have a question about my Home Made AC welder. I built it using the instructions posted here. The out put is 43 Volts Ac. I see all the posts stated 30 plus volts. Is 43 volts to much and should I get it closer to 30 volts? Another thing is the power cable coming from the ac wall outlet. I used the cable from one of the Microwave ovens. It gets a little warm when trying to weld. Should I use a larger cable? Thanks for any suggestions.
I really like the information. I have started my own project and have the transformers both wound with 20 turns of 10 awg insulated wire. I have 23 vac out one transformer and 22 ac v out the other. Will these voltages be ok?
AC welder form microwave transformer
I'm trying to make an ac welder with two microwave transformers using 10 AWG insulated wire. I cant seam to get more than 14 wraps on the transformer. It is full.any suggestions as to how to get the twenty raps on transformer? Thanks for any help.