Happens at Techshop
Working in my istructables and the radio call for help in the wood shop, a member need a DC (?Dream Coach) to adjust the blade saw

Step 1: Yep, the Blade Saw Is Lose

Step 2: Open the Hood???

Step 3: Top and Bottom

Step 4: Spin the Poly and ...

Step 5: ... Put the Saw Back in the Poly

Step 6: Tie the Saw Adjusting the Tension in the Screw

Step 7: Adjust the Poly Angle As Need Too

Step 8: And Done

Close al hoods and start the machine for test before release for members use again.

Done at TECHSHOP

any suggestion to improve the performance of this job?