Introduction: Arduino Mousetrap
Hi there.
Today we are going to make smart Mousetrap with Arduino:)
You reach everything in this instructable.
Let's start friends!
You can watch the video..:)
PLEASE FOLLOW ME AND VOTE MY PROJECTS FOR MORE USEFUL PROJECTS. THANK YOU..:)
Step 1: What Will We Need?
- Arduino
- 2xServo
- Cardboards
- Infrared Obstacle Avoidance Sensor
- a Mini breadboard
- Buzzer
Step 2: What Do We Want?
We want to;
- If a mouse enter the box, cap will close
- When mouse is inside the box, buzzer will get active
- When cap closed, a lock will lock the door..:)
Step 3: Cardboards;
7 x 9 x 12 cm cardboard box
You can make own your box or you can get.
Then make holes for sensor and servos'.
Make a cap and hold this to servo1.
Step 4: Connections;
IOA to Arduino;
Signal to A0
Vcc to 5V
Gnd to Gnd
Buzzer to Arduino;
Long pin to D2
Short pin to Gnd
Servos to Arduino;
Servo1 signal to D9
Servo2 signal to D10
Step 5: Codes;
You can get this work from this link;
https://drive.google.com/open?id=0B6EUM2JQFzOhNG5x...
PLEASE FOLLOW ME AND VOTE MY PROJECTS FOR MORE USEFUL PROJECTS. THANK YOU..:)
Follow my Youtube Channel and get all projects video; >>>My Youtube Channel<<<
![Robotics Contest 2017](https://content.instructables.com/FBV/WY7N/J1WW6ZFS/FBVWY7NJ1WW6ZFS.gif?auto=webp&frame=1&width=320)
Participated in the
Robotics Contest 2017
![Cardboard Contest 2017](https://content.instructables.com/FKT/SX5N/J02QLCST/FKTSX5NJ02QLCST.jpg?auto=webp&frame=1&width=320)
Participated in the
Cardboard Contest 2017
![Microcontroller Contest 2017](https://content.instructables.com/FFZ/8Z2D/IYOQE7ZQ/FFZ8Z2DIYOQE7ZQ.jpg?auto=webp&frame=1&width=320)
Participated in the
Microcontroller Contest 2017