Hello all again)

Happy all the Christmas and New Year) Today I'll show how to maximize our cool PC.

Brief Information ...
I know that some people are very much value your old PC, and any forces trying to improve it ... ie overclock the

CPU or video card .. Here is an article for those very people like me)

Step 1: Step 1 - Getting Started.

What we need in this case
2 regular cooler PC 1 button .. you can take from the old power supply. A couple of bolts and nuts Forend from the body. And of course a clever mind and direct hands ..

Let's go)))

Step 2: Step 2 - Coolers

The photo shows the cooler and held together .. how to do the same .. and be sure to leave to the gap between them is about 30 or 50 mm ...
This is to ensure that they functioned normally both and did not touch each other.

Step 3: Step 3 - Buttons ..

Make a slit in the front plate for that would insert a button on and off additional cooler ..
increase the wire that they can reach the wires from the cooler.

Step 4: Step 4 - Installation

Cut the red wire from the second half of the cooler.
and seal as shown in the diagram .. Insert the cooler in place) but not one but two) All assemble and seal properly)))

Step 5: Step 5 - Check ..

Well, check the efficiency of the coolers we will not. better performance .. or look in the BIOS or program EVEREST.
See photos .. on the first photo shows the work of the computer with one cooler and included emulator. CPU is loaded and heated .. but when games temperature to 70 degrees

and the second photo is already much reduced CPU temperature .. and games have up to 55 degrees)

I hope I wrote it right:-)
Check out the VIDEO if you do not understand or write in the comments ...

Well that's it) with you theFacebook, wait for new articles))
bye bye