Introduction: COMMUNICATION BETWEEN THE BLIND AND DEAF USING ARDUINO AND 1SHEELD
Hi this is my first instructables! Buckle up!
Step 1: PROJECT DESIGN
We have our problem stated so now its time to design a solution for that problem and the solution is as shown below....
Step 2: OBJECTIVES
With the project design being stated, the objectives for this project are....
Step 3: WHAT DO YOU NEED?
- Connect you arduino to ur pc as usual.
- Stack your 1sheeld over your arduino Mega (no special skills required).
- The hardest part would be to connect the nrf24l01 to each arduino but worry no more just refer to the provided pics.
Step 5: TIME TO DO THE PROGRAMMING (Be Afraid Not)
before we write the program, to make our job easier, lets do a flowchart for our program. I guarantee you that programming will be much easier with a flowchart... I've did the flowchart for this project, please OBSERVED and DIGEST..
Step 6: ARDUINO CODE
Download and try it!
Step 7: PROGRAMMING EXPLAINATION
Just in case you might be wondering how the programming works, here's something to help you with..
Step 8: THATS IT!
I consider myself a newbie in the arduino world, so there might be some (or a lot) of error in my coding so if you notice any error please notify me and the rest thank you. Anyways thanks for reading this thread!