DIY Overhead Camera (Super Easy and Cheap)

Introduction: DIY Overhead Camera (Super Easy and Cheap)

What you will need:

Tripod

Selfie stick (With 1/4 inch thread on the bottom to connect to tripod)

Step 1:

Place down tripod

Step 2:

Rotate head on tripod so that it is perpendicular to table

Step 3:

Screw on selfie stick

Step 4:

DONE!!!!!

(If your selfie stick is sagging then use wire to make a support system as seen in video)

For more detail on build please watch the video

My first instructable so I hope you enjoy and feel free to ask questions

Be the First to Share

    Recommendations

    • Plywood Challenge

      Plywood Challenge
    • Plastic Contest

      Plastic Contest
    • Battery Powered Contest

      Battery Powered Contest

    3 Discussions

    0
    qazihamayun
    qazihamayun

    4 years ago

    I used that Idea, Its very workable in need based but dangerous too.. the reason is, Selfie Stick Bottom screw hole(which is attached to Tripod) is made of soft Plastic, very loose and weaker, there is very high chances of camera falling in case of any mishap.

    0
    ConradV2
    ConradV2

    Reply 4 years ago

    I also had this problem and I found a new selfie stick that has a metal base that goes through the whole handle. I will make a update video using it.

    0
    DIY Hacks and How Tos

    That is really clever. This would be perfect for taking pictures of large drawing on a table.