Introduction: Daz108's K'nex Assault Rifle

This is my k'nex assault rifle. This my firt instructable!!!! it is not the best of guns bit it is good enough!! with 2 good elastics it can shoot 60-70ft. There is some problems with the trigger because the ram rod just pushes the trigger out of the way!! Mods to the gun are welcome and if any1 has any ideas on how to fix my trigger problems just drop me a comment

credit to hack124x768 fot the magazine

Step 1: Piece List

Parts you will need for this gun (rouhgly could be out by a few)

greeen/small: around 75
white/grey/black:39 if you want a strong gun

half circles:24
full circle:7
3D blue:12
3D purple:44
red 90degree:4
oronge ladder:22
green 4 prong:4
grey 1 prong:34
grey 2 prong:6
tan clip:9


Step 2: The Stock

again self explanitory

1.make this
2-3-4-5.other angle

Step 3: The Handle

Well the title explains it all!!!!!!!!!! You can add whatever handle you want but this handle suits the gun

1.make this. those are red and yellow bars btw
2.same part from other angle
3.and again
4.make this
5.put together like this
6-7-8.other angles

Step 4: Front of Gun

1.make this
the rest of the pictures are just other angles to help with making this

Step 5: Body of Gun

ok this is a very important part the trigger handle and hopper are conected to here

1.make this
the other pics are just the same part at other angles

Step 6: Hopper/barrol

this is what the firing pin goes into and the hopper

1.the finished part
2.what you'll make first
3.make this
4.add this on both sides
5.another picture of this part you'll make this
7.make 2 of these
8-9.just other angles
10.make this
11.another angle
12.make this
13-14.just a few other angles
15-16-17-18-19. put together like this
20-21-22.put both peices together like this

Step 7: Trigger

easy to make just follow steps

1.make this
2-3.other angles

Step 8: Put It All Together

finally almost done now all you have to do is put the thing together

Participated in the