Introduction: Hook & Ring Toss Game Instructions

The Hook & Ring Toss Games has been a Caribbean Bar favorite for a long time.

Many designs of the Hook & Ring Toss Game have been made through the years. Island Jay sells multiple versions of the same game and just the parts. However, we realize that you can make this game at home with a little patience and time with parts from your local hardware store. We are happy to provide our instructions on how to set up your own Hook & Ring Toss Game at no charge to you.

What you will need

1- Exterior Grade Open Hook, approx 3.5-5" long|
1- Exterior Grade Eye Hook, approx 1" long.
1- 6-7 feet of String
1- Exterior Grade Ring. Known as a welded ring, we suggest at least a 2" diameter
2- 2" Exterior Grade Screws
1- 6" of Adhesive Strips (optional to use instead of the screws)
1- Game Board or place to put the screw hook into.

Our instructions assume you are using a game board, but you can easily put the open hook into any wall and skip the Game Board and 2 screws.

Step 1: Screw the Open Hook Into the Center Hole of the Game Board.

Step 2: Attached Your Game Board to a Wall Using the Adhesive Strips or Screws. the Board Should Be Between 48”-60” From the Floor.

Step 3: Screw the Eye Hook Into the Ceiling About 5 Feet From the Wall.

Step 4: Tie the Ring to One End of the String and Hang the Ring on the Open Hook.

Step 5: Thread the Other End of the String Through the Eye Hook and Pull Until the String Starts to Pick Up the Ring While on the Open Hook. Tie the String to the Eye Hook.

Step 6: Unhook the Ring and Move It Around to Make Sure It Can Land on the Hook. Make Sure the String Is Taught, Just Like If It Was Tossed.

Summer #mikehacks Contest

Participated in the
Summer #mikehacks Contest

squeeze more awesome out of summer contest

Participated in the
squeeze more awesome out of summer contest