Introduction: Jack Skellington
The Peace I will be making for the Instuctables Halloween contest is a simple modle of the one and only Jack Skellington.
Step 1:
The first thing you need to do to complete your model, is get all needed materials. There is not much needed just Wire, White medical tape, Wire cutters, A sharpie, and a nice base for your model to rest. Such as a flat piece of wood or anything that comes to mind.
Step 2:
After you have all your needed materials, use the wire to carfully shape and construct your Jack Skellington.
Step 3:
Once you have succsesfuly shaped your body and body parts with the wire cautiously wrap the wire with the medical tape. Wrap as much as needed.
Step 4:
Once your piece is all shaped and wrapped, its time to start adding color. Add color where ever needed.
Step 5:
To make your model really stand out, finish with using any flat piece of wood and drill two small hole in the wood to place your Jack Skellington into.
Step 6:
Now you have your Jack Skellington is complete and ready for display.
![Halloween Contest 2017](https://content.instructables.com/F8D/V6Q8/J81RD67G/F8DV6Q8J81RD67G.jpg?auto=webp&frame=1&width=320)
Participated in the
Halloween Contest 2017