Introduction: Knex Annoying Machine
This knex annoying machine is simple yet effective. When you turn the crank, the sound that comes out of it will annoy everybody within hearing range.
Step 1: Parts Count
Connectors
Orange - 2
Grey 3D - 24
Yellow - 4
White - 2
Rods
Green - 28
White - 2
Blue - 1
Yellow - 1
Other
Blue Spacer - 1
Sliver Spacers - 3
Tan Clip - 1
Red Gear - 1
Step 2: Making the Whole Machine
Pic 1: Make the bottom of the box.
Pic 2: Build the top of the box.
Pic 3: Slide a yellow rod with a tan clip into the bottom of the box.
Pic 4: Add a red gear with a few spacers to the yellow rod.
Pic 5: Snap white rods around the edge of the box.
Pic 6: Slide the top part on and connect it to the bottom with green rods.
Pic 7: Add a few spacers and snap on the crank.
Step 3: You Are Finished!
Your Done! Turn the crank fast, but don't get too cranky!
![Make Noise Challenge](https://content.instructables.com/FR2/2L7U/IX0PR6O4/FR22L7UIX0PR6O4.jpg?auto=webp&frame=1&width=320)
Participated in the
Make Noise Challenge