Introduction: K'nex DVD/disc Holder
this is my first instructable Enjoy!
Step 1: Parts
these are the parts you will need there are:
4 orange connectors
4 yellow rods
1 red rod
1 white connector
1 green connector
1 grey rod
1 tan connector
4 orange connectors
4 yellow rods
1 red rod
1 white connector
1 green connector
1 grey rod
1 tan connector
Step 2: Stand
the stand is very simple
Step 3: The Holder
this is what holds the disc just add ot on the red rod
Step 4: DONE
this is the result XD