Introduction: K'nex Micro Crawler/Walker
More by the author:
About: I make K'nex guns, specializing in semi-automatic, RBG-Slingshot hybrid systems which i use in most of my guns.
Note: I am not responsible in any way for any damage, injury, or death caused by my Instructable…
This is probably not the best one out there but it is probably one of the smallest. It doesn't do much except crawl forward (or backwards). It can climb over some obstacles but not all. It is also easy and fast to make.
More Instructables by Me
The images show it movng forward.
More Instructables by Me
The images show it movng forward.
Step 1: MainBody
Image 1: Make this.
Image 2: Place 2 white rods in the motor as shown.
Image 3: Connect the 2 together.
Image 2: Place 2 white rods in the motor as shown.
Image 3: Connect the 2 together.
Step 2: Legs and Rest
Images 1-2: Make 2 of each.
Image 3: Put them together as shown.
Image 4: Add gray connectors as shown.
Image 5: Add a yellow rod and 2 spacers as shown to the motor.
Image 6: Connect the legs as shown.
Image 3: Put them together as shown.
Image 4: Add gray connectors as shown.
Image 5: Add a yellow rod and 2 spacers as shown to the motor.
Image 6: Connect the legs as shown.
