Introduction: Knex Pistol Cannon
This is my handheld knex cannon. It Shoots around 60-70 feet and uses minimal pieces.
Step 1: Piece List
Rods:
Green 13
White 41
Blue 12
Yellow 3
Connectors:
Yellow 5
Green 7
Gray 7
Light gray 2
Orange 2
Tan clip 2
Blue 3D 20
Silver / Purple 3D 12
Spacers:
Silver 6
Blue 6
Total: 138
Green 13
White 41
Blue 12
Yellow 3
Connectors:
Yellow 5
Green 7
Gray 7
Light gray 2
Orange 2
Tan clip 2
Blue 3D 20
Silver / Purple 3D 12
Spacers:
Silver 6
Blue 6
Total: 138
Step 2: The Barrel
1. Build these
2.Build this
3. Put them on
4. Make this
5. Another view
2.Build this
3. Put them on
4. Make this
5. Another view
Step 3: Trigger Mechanism
1. Make this
2. Make these
3.Attach
4. Make
5. Attach
6. Make
7. Attach
2. Make these
3.Attach
4. Make
5. Attach
6. Make
7. Attach
Step 4: The Handle
1. Make this
2.Make this
3. Put them together
4.Make this
5.Make
6.Attach
7. Oops
8. Put Together
2.Make this
3. Put them together
4.Make this
5.Make
6.Attach
7. Oops
8. Put Together
Step 5: Assembly
Put the gun together!!
1.take these two pieces
2. Connect them
3.Add Blue rods
4. Attach Handle
5. Attached handle
6. Completed gun!!!!!!!!!!!!!!!!!!!
1.take these two pieces
2. Connect them
3.Add Blue rods
4. Attach Handle
5. Attached handle
6. Completed gun!!!!!!!!!!!!!!!!!!!
Step 6: Grab Rod & Ammo
1.Grab rod
2. Ammo
2. Ammo
Step 7: Rubberbands, Loading, and Fireing
1. Take off the orange connectors & the white rods
2.Put rubberbands on
3.Put a rubberband on the trigger
4. Pull the rubberband back with the grab rod
5. The loaded gun
6. With wheel ammo
7. With gear ammo
8 With white connector ammo
Enjoy the gun
Please rate
Please comment
Please tell me about any ammo that works well.
2.Put rubberbands on
3.Put a rubberband on the trigger
4. Pull the rubberband back with the grab rod
5. The loaded gun
6. With wheel ammo
7. With gear ammo
8 With white connector ammo
Enjoy the gun
Please rate
Please comment
Please tell me about any ammo that works well.