Introduction: Leather Card Case
More by the author:
About: We are a professional leather pattern design and tool development studio, we offer high quality pdf, acrylic patterns, and high quality leather tools. We have 2 online stores: www.leathercraftpattern.com www.l…
You can have this acrylic pattern from here:
http://www.leathercraftpattern.com/Acrylic-templat...
The finished size is: 3.1" x 3.9" x 2.2" (8cm x 10cm).
Advice:
Leather: We advice 2.0mm (5oz) leather, size 25cm x 25cm.
Hardware: No.
Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-...
Step 1: Cut All Pieces From Acrylic Pattern and Punch Stitching Holes.
Step 2: Paint Glue on Lining's Edges.
Step 3: Sew the Edges.
Step 4: Wet the Flesh Side a Little and Mould It With a Pencil.
Step 5: Put Some Cards in to Keep the Molded Shape.
Step 6: Sew Surface Sleeve.
Step 7: Wet and Mould It.
Step 8: Put More Thing in to Keep the Molded Shape.
Step 9: Now Do the Same Steps for the Lid.
Step 10: Paint Glue.
Step 11: OK Finished.
