Introduction: MSMG
More by the author:
About: I make K'nex guns, specializing in semi-automatic, RBG-Slingshot hybrid systems which i use in most of my guns.
Note: I am not responsible in any way for any damage, injury, or death caused by my Instructable…
This is my MSMG (Masterdude Sub-Machine Gun). It has a true trigger and like most of my guns is semi-auto (there is some controversy over the term semi-auto but according to me in K'nex it means that every time you pull the trigger, a shot is fired)
Pros:
-Strong
-Accurate
-Semi-auto
-Removable magazine
-Adjustable stock
-Rather easy to use
-Adjustable cheek rest (when stock is extended you can slide it where you like it)
-Looks
-True trigger
Cons:
-Handle might be uncomfortable for some people
-Can be hard to load at first (But becomes easier with some practice)
Image 1: Stock extended.
Image 2: Stock compacted.
More Instructables by me.
Pros:
-Strong
-Accurate
-Semi-auto
-Removable magazine
-Adjustable stock
-Rather easy to use
-Adjustable cheek rest (when stock is extended you can slide it where you like it)
-Looks
-True trigger
Cons:
-Handle might be uncomfortable for some people
-Can be hard to load at first (But becomes easier with some practice)
Image 1: Stock extended.
Image 2: Stock compacted.
More Instructables by me.
Step 1: Main Body: Making the Components
Make the following. Each will be assigned a letter for identification:
Image 1: Make 1. (Part A)
Image 2: Make 1. (Part B)
Image 3: Make 2. (Part C)
Image 4: Make 1. (Part D)
Image 5: Make 1. (Part E)
Image 6: Make 1. (Part F)
Image 7: Make 1. (Part G)
Image 8: Make 1. (Part H)
Image 9: Make 1. (Part I)
Image 10: Make 1. (Part J)
Image 11: Make 1. (Part K)
Image 1: Make 1. (Part A)
Image 2: Make 1. (Part B)
Image 3: Make 2. (Part C)
Image 4: Make 1. (Part D)
Image 5: Make 1. (Part E)
Image 6: Make 1. (Part F)
Image 7: Make 1. (Part G)
Image 8: Make 1. (Part H)
Image 9: Make 1. (Part I)
Image 10: Make 1. (Part J)
Image 11: Make 1. (Part K)
Step 2: Main Body: Construction
Follow the images:
Image 1: Add white and blue rods to part A where indicated.
Image 2: Attach part B and add white and blue rods.
Image 3: Attach part C, white rods, and 2 blue spacers.
Image 4: Add parts D, E, F, G, and H.
Image 5: Add part C, blue spacers.
Image 6: Add part I.
Image 7: Add parts J and K, and tan clips.
Image 8: Add metallic blue clips.
Image 1: Add white and blue rods to part A where indicated.
Image 2: Attach part B and add white and blue rods.
Image 3: Attach part C, white rods, and 2 blue spacers.
Image 4: Add parts D, E, F, G, and H.
Image 5: Add part C, blue spacers.
Image 6: Add part I.
Image 7: Add parts J and K, and tan clips.
Image 8: Add metallic blue clips.
Step 3: Stock: Making the Components
Make the following. Each will be assigned a letter for identification:
Components A: Follow images 1-3 to make this component. Make 4 of these.
Component B: Follow images 4-6 to make this component. Make 1 of these.
Component C: -Image 7: Make 2.
-Image 8: Make 3.
-Image 9: Add blue rods.
-Image 10: Add 3 parts as shown.
-Image 11: Add the last part.
Components A: Follow images 1-3 to make this component. Make 4 of these.
Component B: Follow images 4-6 to make this component. Make 1 of these.
Component C: -Image 7: Make 2.
-Image 8: Make 3.
-Image 9: Add blue rods.
-Image 10: Add 3 parts as shown.
-Image 11: Add the last part.
Step 4: Stock: Construction
Follow the images:
Image 1: Take 2 of the earlier made parts and add 7 orange connectors.
Image 2: Take earlier made parts and connect as shown.
Image 3: Add 5 orange connectors and connect as shown.
Image 4: Connect another of the earlier made parts as shown.
Image 5: Attach all those parts as shown.
Image 1: Take 2 of the earlier made parts and add 7 orange connectors.
Image 2: Take earlier made parts and connect as shown.
Image 3: Add 5 orange connectors and connect as shown.
Image 4: Connect another of the earlier made parts as shown.
Image 5: Attach all those parts as shown.
Step 5: Magazine: Making the Components
Make the following:
Image 1: Make 2.
Image 2: Make 1.
Image 3: Make 1.
Image 4: Make 1.
Image 5: Make 1.
Image 1: Make 2.
Image 2: Make 1.
Image 3: Make 1.
Image 4: Make 1.
Image 5: Make 1.
Step 6: Magazine: Construction
Follow the images:
Image 1: Add white rods.
Image 2: Place the earlier made parts as shown.
Image 3: Cover with the earlier made part.
Image 4-5: Finished magazine with ammo and pin in place.
Image 6: Ammo.
Image 1: Add white rods.
Image 2: Place the earlier made parts as shown.
Image 3: Cover with the earlier made part.
Image 4-5: Finished magazine with ammo and pin in place.
Image 6: Ammo.
Step 7: Putting Everything Together
Connect the parts you have made as shown.
Step 8: Loading and Firing
This gun loads and fires like most of my guns like my MAR, MAR-2, MSAU, ETC. To load you first remove the magazine and put the pin in place, and then you insert the ammo which is shown in the image below. Then you insert the magazine into the appropriate place until it firmly holds in place. They you push the white rods over the ammo feed out to the side and you take the rubber-bands and hook them on the tip of the barrel and then on the spoke in the back of the gun. Then you push the white rods back into place and pull the pin out of the magazine. To shoot you pull the trigger.
Image 1: Ammo.
Image 2: Loaded. View of barrel end.
Image 3: Loaded. View of ammo feed.
Image 4: Loaded. View of trigger system.
Image 5: Magazine in place. Pin in.
Image 6: Magazine in place. Pin out.
Image 7: First person's view.
Warning- This may cause harm or injury if misused. Do not point it at people. I am not responsible for damage, injury, or death caused by this instructable.
Image 1: Ammo.
Image 2: Loaded. View of barrel end.
Image 3: Loaded. View of ammo feed.
Image 4: Loaded. View of trigger system.
Image 5: Magazine in place. Pin in.
Image 6: Magazine in place. Pin out.
Image 7: First person's view.
Warning- This may cause harm or injury if misused. Do not point it at people. I am not responsible for damage, injury, or death caused by this instructable.
