Introduction: Origami Heart.
Things you will need:
A piece of computer paper or any colored paper you'd to use.
Step 1: Step 1: Fold in Half.
Step 2: Step 2: Tear Paper in Half.
Step 3: Step 3: Fold Diagonally to Make a Square. Excess Paper Will Be at the Bottom.
Step 4: Step 4: Fold Excess Bottom Paper, Then Tear Excess Paper Off.
Step 5: Step 5: You Should Have a Square. Turn Paper to Look Like a Diamond.
Step 6: Step 6: Fold in Half.
Step 7: Step 7: Unfold. Fold Top Peak to Middle Point.
Step 8: Step 8: Fold Bottom Peak Up to Top Passing the Middle Point.
Step 9: Step 9: Take Right Side of Your New Middle Line and Fold Upwards. Repeat on the Other Side.
Step 10: Step 10: Should Look Like This.
Step 11: Step 11: Flip Over on Back Side. Should Look Like This.
Step 12: Step 12: Fold One of Your Top Peaks to the Straight Line. Repeat on the Other Side.
Step 13: Step 13: Fold Both Outer Peaks Inward Evenly.
Step 14: Step 14: Finish Product Should Look Like This.
Be the First to Share
Did you make this project? Share it with us!
Recommendations
Teach With Tinkercad Contest

On a Budget Challenge

Sculpt & Carve Challenge

Comments
2 years ago
Thanks for sharing your fold!