Ping Pong Tetherball

Learn How to make this fun, time-consuming ping pong tetherball game. You will need a fret saw though.

Step 1: Cut Out Base

Your base is a circle with a diameter of about 15 cm. Cut it out with a fret saw

Step 2: Cut Out Your Racket

Cut out your racket ,it should have a diameter of about 7cm diameter. Cut it out with a fret saw.

Step 3: Cut the Wooden Dowel

Cut the wooden dowel so it about 20 cm.

Step 4: Drill a Hole in Your Base

Drill a hole in the middle of your base piece, make it however big your dowel is. Use a drill.

Step 5: Put Your Dowel in the Hole

Put your dowel in the hole, use glue or duct tape to make it stable.

Step 6: Drill a Hole in Your Dowel

Drill a small hole at the top of your dowel. Use a drill.

Step 7: Tie Your String

Put your string through the hole and tie it.

Step 8: Attach the Ping Pong Ball

Attach the ping pong ball using hot glue from a glue gun